Quantcast
Jump to content

Hisun 500 sector

borahawk

By borahawk
in Hisun UTV SxS Forum

 Share

Recommended Posts

Flanman55 Apprentice

Flanman55

Posted
Posted

I purchased a farm used 2007 Hisun 700 back in January 2019. early thoughts were not that great of the machine but after using it for 5 months on a pipeline project, I changed my mind. I did do some minor maintaining early on. Oil changes of the diffs and engine and a new battery, spark plug etc. Like I said, ran it for a full 5 months and it never let me down. So after the 5 months of being a work horse, I had the ball joints replaced with Yamaha Rhino ones. Plus the secondary and primary clutches. Added a voltage gauge and usb charger, added an actual temp gauge ( Cheap not working unless moving). 

All in all, I haven't used it for work or play in a year since all the clutch work but after sitting all winter, it started right up and ran awesome for year old gas. I paid $2600 for it and used it for work which pays me to use it. Best investment to date. I would buy another hisun if I can get it at a good price an day of the week. If i need parts I head to the Yamaha shop and get parts.

Link to comment
Share on other sites
PierceIt Apprentice

PierceIt

Posted
Posted

I have a 2017 cub cadet challenger 750 eps (which is a hisun with some nice trimmings and a cub cadet logo on it)

it was a great work horse on our ranch until it just wasn’t. First two years were great and then this last year it’s been in the shop more than home and cost me a fortune to fix.  It’s needed a new inner and outter clutch,  a new cvt belt, and now a new timing chain, camshaft and sprockets. The hisun engines are made with a very cheap metal on all the inside parts and the thing just wears out way too fast for a new machine with only 180 hours on it and 500 miles - and I’ve never missed an oil change or maintenance job yet still the thing has failed.  Lots of forums talk about this.  I’ll never buy another one. Make sure to run full synthetic oil in it to help protect the cheap metal parts in the engine and transmission. or better yet - just don’t get one. Trust me on this...

next time I’ll be Saving up a little longer and buying a Ranger
 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • ETHIEL
      2012 Coleman 500 UT plug keeps fouling.
      By ETHIEL
      Spark plug keeps fouling. after 10-15 minutes of running any ideas what to look fore 
    • nods
      2022 sector 750 GAS powered: Codes E-113, E-108, E-123, E-132, E-650. What are these?
      By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • lonerider98
      2013 UT 500 won't go into reverse.
      By lonerider98
      At the end of last year my Coleman UT 500 will not go into reverse. I can hold it over toward the reverse to move it nut it won't lock into reverse. Anyone have this problem? Winter is just about over and going to have to get this resolved. Thank You!
    • Hugh
      2018 Hisun Sector Crew 1000 engine die after about 15 minutes run
      By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh
    • Hi sun 500
      2011/14 Hisun 500 fuel issue
      By Hi sun 500
      hello everyone, i just joined this forum to try my luck, few days ago i bought an old (dont know exactly), 2011/14 hi sun 500cc ""carburated"",  was not running at the time, but i fell was a good deal and decided it to bring it home to play with it, this is the issue, i bought and installed a new carb, and pump, i repositioned the battery location and upgraded to a "car batt", reconnected the fuel lines and started it, but it only runs with the choke ON, i checked the bowl, it does have fuel,but for some reason wont inject it to run, i came across a video that say that ""the body small tank had to be connected for the cart to run" (was deleted when bought), sure enough i got it to run sporadically , but the so called ""small body tank'' often runs out of fuel and wont refill itself , i had to couple times do it manually, so how does that small tank works ?..what does it do?..and why if  bypass it , the cart wont start?....any help?..thanks so much!!!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...