Quantcast
Jump to content

New Coleman Outfitter 550 owner


Birddog1148
 Share

Recommended Posts

Well after a good buddy of mine shared how happy he was with a Massimo 500 I decided to pull the trigger on one of my own.  Probably the main use will be dirt roads and trails near Baldwin Mi where I have a camp.  But my town does allow them to be plated and driven on the road.    Hope my experience is as good as my buddy's is.  Behind it there is a 400 King quad that you cant see and a 86 CJ7 project and my 69 Baja bug.

IMG_20200430_135627.jpg

  • Like 1
Link to comment
Share on other sites

  • 4 months later...
  • 9 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

 Share

  • Similar Topics

    • By Liv4upoutdoors
      Has any one replaced their radiator fan to the Massimo 410.  My buck is overheating.   I checked fuse which was good... then  I was going to jump the fan switch and have it run all the time but its not turning on.  So much for the easy fix.   I guess my next step is to replace the fan.  I would like to get the same fan so its easy to switch out.  There isn't alot of room to work in there.   So trying to make it alittle easier.  Thank you kindly for your input.  
       
    • By Ric Silveira
      Like to upgrade to led headlight bulbs
      Anyone know what part number I need to replace the original  bulbs they are terrible cant see anything lol
      Thanks
    • By FTR
      Hello I know I started this topic before but I have lost it.  So here is the story, I bought this XLT 500 earlier this year it is was and still is in rough shape the ID plate is gone, faded paint, bad window, etc...  When I got it, it ran rough and the all of a sudden  it quit running.  So I started looking into it and found no spark.  No biggie changed plug, and coil, still nothing.  So went and replaced the coil wire, still nothing.  So I have gone pretty far now.  I have replaced the stator magneto, the voltage regulator, CDI, I do have the crank shaft position sensor but have never figured out where it goes have been told around the stator but have yet to find it.  Have chased wire out and still nothing.  At the coil I have one wire giving good voltage the other one nothing, and when you crank it the voltage goes all over the place.  So besides the key I have changed every part that has to do with the starting that I can find.  So information on what I am missing or doing wrong would be great, it acts like the kill switch on the brakes is stopping it from starting, however I have bypassed that to make sure that was not the problem and still nothing.  So aside of parking this thing in the back and letting it die a slow death I am at a loss on what to do next, Help!
    • By Tiff Rumsey
      I own a 2020 T-Boss410 I'm having problems with it over heating with it just idling for maybe 10 minutes, I have checked the fan and it works. I wired the fan up to a switch so it runs all the time and it still over heats within 10 minutes. Anyone have suggestions?
    • eManualOnline
    • By res2fr
      Hello All,
       
       I am trying to find a Scanner that is works for a 2016 MSU500. I found the Tiny Scan TS301 that looks like a decent Scanner but so far have not been able to get confirmation that this works on and older model. It has been stated that it works on the 2019 and newer but not sure about older models. It appears that the ECM/ECU/EFI modules are likely interchangeable between a 2016 and the newer 2019 and on but not sure of the Scanner. I am waiting for feedback from Hisun on this issue right now.
       If this unit is not usable for my model year has anyone found and a Diagnostic Scanner for the older machines, one that works and is Affordable?
      Thanks for reading my post and any information that you may have to share,
      Robert
  • Similar Tagged Content

    • By Ric Silveira
      I like to get ngk idirinium plug for it anyone know part number.
      Thank you
    • By rhinoknockoff
      I have a Coleman (Hisun 700 engine) vintage 2014 model. It is my beater for around my acreage so it gets very little use. Have a much nicer ride for going on road and trail runs. Anyway, this year I notice at startup with a cold engine the high temp warning light comes on right away and does not go off. Engine does not seem to overheat but the radiator fan never seems to come on-but may not be running it long and hard enough for that to happen. 
      Any ideas why the engine high temp warning light would come on and stay lit with the engine cold?
    • By RDD
      Have a 2019 Coleman Outfitter 550.  only 30 hrs on it.    Just quit running.  Found the F8 fuse blown.  Replaced and blew again.  Traced ALL wires and found nothing.  Replaced all  relays and fuse so it starts up but hit the brake pedal and it blows the fuse again and will not start.   Retraced the wires and found nothing damaged.   Any Ideas?   Coleman is NO HELP at all
    • By tsheh4
      For whats its worth, I emailed Coleman about getting my MSO and the guy there was able to send me a current manual for my buggy, the one it cane with and the one on Tractor supplies website seems to be for an older model. Nothing seems to have changed except for the column mounted controls.
    • By cliffyk
      Here are a couple more 3D printer files for the HS400/Coleman UT400 & Outfiltter 400. Included in the .zip file are my version of a seat belt interlock defeat insert (SeatBeltThing-01.stl) and an oil filler adapter allowing a 1/2"I.D. hose to be attached making adding oil a less messy operation (OIlFiller-whole-03.stl) --both may also work on other UTVs with similar the seat belt connectors and a 3/4" x 10  threaded dipstick...
  • Gallery Images


×
×
  • Create New...