Quantcast
Jump to content

What's the expected compression?


Recommended Posts

I couldn't find anything on google or other websites....

 

 Pretty sure the camshaft will have a automatic compression relief on it that relieves compression out of the cylinder via one of the valves during start up, so usually when cranking the engine with a compression tester the reading won't be the Exact compression of a engine running at 2500 RPM, But, it seems to be  a baseline for all  small engines whether it be lawnmowers or 4 wheelers,  seems as though 85 to 90 PSI is the minimum to start a 4 stroke engine.

 

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By nods
      Less than 40 miles can barely start. Dealer is working with Hisun on a number of other issues on this UTV. Can not get clear info on the meaning of these E codes this is getting. Anybody have some clear info for me?
    • By Nypto
      I just bought a new Hisun 750 sxs. I drove one mile and it just died. No power at all. Battery is 12.8v. Found no blown fuses. No power to the panel, no nothing. Problem for me is I bought 160 acres near big bend. Trying to build a house. Got blown up in 'Nam . Can't walk much. Scared I'm way out and it fails again. I heard something  about a brake switch,  but I have no idea where it might be.
    • By Paul409
      Have a Hisun 750 only 700hrs 21 model. Never had issues went to start it and there's a clicking sound under the seat I'm assuming it's the started relay. I for the life of me cannot find the starter, is there a way to test the relay. 
      Thank for any support 
    • By new owner
      no neutral light but engine turns over and wont start. whats wrong?
    • By bikermike
      Since it is a royal pain to close the front hood, I went to add a charger wire so I don't  have to worry about the hood, I found the screw on the positive post rusted .  this utv is 11 months old. and since it's a Philips head, it was impossible to loosen . had to use vise grips. 
      replaced the screw with an hex bolt
×
×
  • Create New...