Quantcast
Jump to content

New guy - just got a Massimo MSU 500

rtate1050

By rtate1050
in New Members Area

 Share

Recommended Posts

rtate1050 Apprentice

rtate1050

Posted
Posted

Hi eveyone. My name is Rich and I'm in central Florida. I just got a Massimo MSU 500 which I'm primarily using for work on my property although I will probably be persuaded to do an occasional trip. I'm not new to motorsports but new to side by sides and off roading  . I hope to speak with some of you and hopefully get some guidance on working on my ride.

Rich

Link to comment
Share on other sites
  • Alex changed the title to New guy - just got a Massimo MSU 500
rtate1050 Apprentice

rtate1050

Posted
  • Author
Posted

Thanks. I see that there are mixed reviews on this forum about the quality of these machines and about the company. I can only say that I bought this on Ebay and  in dealing with Massimo they have been a pleasure to deal with . I had a couple of issues and they were taken care of immediately . Everyone that I have dealt with has been super helpful and nice people.

I don't plan on subjecting it to very hard use so I think that I'll be OK. Time will tell.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • sister sweety
      New member here
      By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • Buddee
      2010 500 - New Carb- Hesitation
      By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • ATRican
      New here from PR
      By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
    • great8redsfan
      2017 Challenger 500 No power on take off or hills
      By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
    • htrotte
      2011 Massimo HS500UTV-EFI third temp switch?
      By htrotte
      #1   While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
      Author #2   Finally got the pictures took.  See the photo and tell me if you know what the switch on the right is.
      It looks to be factory and I know the girl who bought it new and she didn't install it.
      I can't find anything on it in any manual i have looked at.  Any help would be appreciated.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...