Quantcast
Jump to content


New to owning a SXS

2wpuller

By 2wpuller
in New Members Area

 Share

Recommended Posts

2wpuller Contributor

2wpuller

Posted
Posted

I picked up a 2015 Odes Dominator 800 2 seater. 62.8 hours and 889 miles. I just picked it up 2 weeks ago.last Sunday I went riding with my son he has a 2017 RZR 1000XP and my soninlaw he has a 2018 wolverine mine has been used for what it was intended for I guess. Lol

I missing the roof,windshield, and tailgate,and taillights broken but still work..it still has the cat in the exhaust. Going to take it off and the muffler and make my own muffler for the tone i like. It runs great. Good power. Going to do some work on the suspension for a little softer ride.I gotten spoiled riding in the RZR..

I'm probably gonna ask a few questions about the Odes. I have worked on the rzr alot..

Any suggestions would be great.

Thanks 

Dale

kenfain Experienced

kenfain

Posted
Posted

Welcome to the forum!

I'm not familiar with your machine, but I do know that most units these days are CPU controlled. Fuel injected, and the mix is determined by several things. 

So here's a question. Does your cat have an o2 sensor? If it does, won't that create fuel delivery issues?

2wpuller Contributor

2wpuller

Posted
  • Author
Posted

Going to have the ecu reflash with a modified tune. Haven't 

Made my mind up yet on who's tune yet. Haven't had a chance to do anything to the machine yet.

Been putting in alot of hours in at work. 

You can fool the signal from oxygen sencor with resistors to richin it up if necessary. Have done it on cars for years after gutting the cat's out.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • esmarkey
      2018 cub cadet 750 challenger clutch issues?
      By esmarkey
      Hi, I purchased a used Cub Cadet 750 Challenger that seemed like the belt was slipping so I put a new belt in.  It still acts like the belt is slipping but now I am thinking it is the clutch? 
      What is the best way to remedy this problem? 
      Can the clutch be rebuilt?
      Are there aftermarket clutches available? 
    • Sidewinder
      Polaris RZR 800 Rear Differential Pinion Nut Issue
      By Sidewinder
      All mid 2008 through 2014 Polaris RZR 800 series have a big problem with the rear differential pinion nut backing off, allowing the pinion gear to shoot into the rear differential, destroying the rear differential. This has happened with machines with as little as less than 100 miles on them! Reports indicate that there are no problems, nor warnings, until the rear differential grenades, locking the rear axles solid! This requires the machine to be lifted onto a trailer, to be transported for rear differential replacement, as it destroys the case. After failure, rear differential replacement can be quite expensive: labor alone can run from $800-$1200 and a new OEM Spicer rear diff, if you can find one, can run from $1700-$2500! So, if you own any Polaris RZR 800 series between the years of 2008-2014, I recommend that you do this repair before further use of your machine. personally, I have grounded my machine until it can be done. Please check the online post for your own awareness.

    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...