Quantcast
Jump to content


Coleman 750 UTV

robert jamieson

By robert jamieson
in Coleman UTV SxS Forum

 Share

Recommended Posts

Ridge Runner Collaborator

Ridge Runner

Posted
Posted

Please let me know where the fuel filter is.  I have the Coleman 550 Outfitter version of the Hisun.  Manuals say filter must be changed.  No location specified in the manual.  I traced the fuel line from tank to injector, can’t find it.  I called Coleman, they told me some never got them.  Guess, I need to cut line and put a universal riding lawn mower filter in the line?  Thanks

Travis Grand Master

Travis

Posted
Posted
1 hour ago, Ridge Runner said:

Please let me know where the fuel filter is.  I have the Coleman 550 Outfitter version of the Hisun.  Manuals say filter must be changed.  No location specified in the manual.  I traced the fuel line from tank to injector, can’t find it.  I called Coleman, they told me some never got them.  Guess, I need to cut line and put a universal riding lawn mower filter in the line?  Thanks

What size fuel line? if it's standard 1/4 or 5/16" ID i use a Wix 33011.

cliffyk Rising Star

cliffyk

Posted
Posted

FWIW; I have never in 70+ years replaced a fuel filter because it needed to be replaced. I have added them to engines that did not have one--a good thing to do-; and changed them periodically as preventative maintenance, but have never had to replace one  due to poor performance (most likely due to my being kind of anal retentive about PM).

Also re; adding a filter, the nipples on the filter do not have to be a precise match with the I.D. of the hose; that's why God created Ideal clamps...

Ideal clamp:
IdealClamp-00.jpeg

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Popular Now

  • Similar Topics

    • Kierobi
      MSU 500 Fuel Pump Ground
      By Kierobi
      Have a MSU 500 that we got from my wife's uncle a while back. We've had it running and hauling around the property but it stopped a few months ago after what I thought was running out of gas and I'm just getting to looking into it. 
      Had fuel to the injector but nothing coming out the injector so swapped with new injector and installed inline filter in the supply hose from fuel pump. Tried again and still nothing but noticed this time that I can't hear the fuel pump priming. 
      Pulled off the electrical connection and I'm getting 12V to the fuel pump but it won't run. Put it on a test bench and got it to run so put test lamp between +ve and -ve terminals on the connector and nothing. Checked against the passenger seat securing post and get a light. 
      Tried chasing the wire back and think that the ground is through the ECU but not 100% sure. Can someone confirm for me? And if it is through the ECU, is the ECU just grounded against the frame or is it wired through to the battery?
      Thanks in advance and hope this all make sense!
    • Butch
      2023 Hisun Axis 700 fuel problem
      By Butch
      I have a AXIS 700 EFI Fuel pump pressure stays at 40 psi and when return line is blocked the pressure goes to 60 psi. and wll only run with return line closed. 
    • Jeff freeman
      Utv wont start and broken fuel injection wire
      By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • Eman85
      Fuel injector replacement Massimo 500
      By Eman85
      Pulled fuel injector to see if I could clean it or if it's stuck open. Had a slide on clip that was really tough to get off. Don't see how the clip is supposed to lock into the plastic part that the injector slides into. Any videos or pics of injector replacement? 
    • monkthumper
      2020 Hisun Sector 750 fuel pump and cooling fans inop.
      By monkthumper
      Fuel pump and cooling fan inop. I have the fuel pump hot wired that keeps me goin but now cooling fan wont kick on. I'm bout to look for a scanner hook-up unless someone can give me direction, any help?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...