Quantcast
Jump to content

After market part for Tboss 410?


Steven78

Recommended Posts

I've done this before. What I've always done is use the part number, and do a search on Google or whatever search engine you prefer. Then you can find out if anyone else manufactures the item in question. You could also do a search using the term "voltage regulator 2019 Brenneke T-boss 410". That's all I can suggest. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Nathon S.
      I have a Bennche 700 EFI Bighorn. I’ve recently been unable to get it to start. After a little troubleshooting I realized my fuel pump was not pumping fuel. This weekend I emptied the gas and replaced it with new. I replaced the fuel pump, fuel filter and fuel injector. I also replaced the battery, spark plug and made sure all my fuses and relays were good. I have confirmed that the float on the fuel pump is not obstructed. The UTV is about 12 years old and has less than 100 hours on it. It has not run in over a year.  Not sure whats going on?!? After doing a little reading I'm leaning towards it being an issue with the ECU or perhaps a faulty wire in the wiring harness. Anyone have any ideas on where to start looking or what I could be dealing with? Any help is appreciated, thanks in advance!
    • By Hugh
      My 2018 Hisun sector crew engine cut off after about 15 minutes run. There is no indicator of what is wrong, no error code just die and won't restart until it cool down. I notice that the fan is not running but the temp indicator is on low temp, no overheat indicator. I checked the radiator fluid, it is cool to touch.
      Cooling fans are working, I can hear it running once awhile if I can get the engine warm up enough.  Thank you for all the help.
       
      Hugh
    • By Dave N.
      2020 Massimo Buck 400 - Won't start. Can hear the starter spinning, but motor never turns. Relay? Starter? Worked fine one day and not the next. Thanks for any help you can provide.
    • By johnpeter
      RZR 1000 XP EPS - Rocks & Trails Edition 2020 On Ebay
      https://www.ebay.com/itm/355474995514?

    • By dspikes
      I am looking to replace the fuel injector on my Bennche Bighorn 400.  It calls for part #16400-003C-0000, but the fuel injector part #16400-004C-0000 is much cheaper.  Are they compatible?   Thanks, in advance, for your help!
×
×
  • Create New...