Quantcast
Jump to content


2012 Bennche Bighorn Front Wheel Bearing Seal

Scott Currence

By Scott Currence
in Bennche UTV SxS Forum

 Share

Recommended Posts

Scott Currence Rookie

Scott Currence

Posted
Posted

I need to find a new inner front wheel bearing seal for my 2012 bennche bighorn 700. I ordered a front wheel bearing kit and the inner seal is too big. I need to find just the seal and it needs to be the same od as the bearing. The specs listed are 55x38x8. Does anyone have a line on what I can get? Thanks. Our local Bennche dealer is no longer ordering parts and I don't want to order another kit with the same issue.

  • 6 months later...
rayford61 Newbie

rayford61

Posted
Posted
On 10/5/2021 at 9:51 AM, Scott Currence said:

I need to find a new inner front wheel bearing seal for my 2012 bennche bighorn 700. I ordered a front wheel bearing kit and the inner seal is too big. I need to find just the seal and it needs to be the same od as the bearing. The specs listed are 55x38x8. Does anyone have a line on what I can get? Thanks. Our local Bennche dealer is no longer ordering parts and I don't want to order another kit with the same issue. Yamaha 660 has the same diff seal I have the same issue I ordered a set then tore my machine down only to find seal I received is for the rear (to large)

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Looking for a left rear shaft carrier (just the carrier) for a 2007 Joyner 1100 sand viper
      By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • paul allen
      2016 wildcat tail front axle rubber boot
      By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • MilSurpYinzer
      New Mexico etc
      By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • Burk
      2021 Axis(Hisun) 700 Will not fire up
      By Burk
      I have a 2021 Axis(Hisun) 700 from Lowes. Will not start. Checked starter, solenoid, spark plug and fuel pump. Everything seems to be fine. The motor turns over and will try to start but just will not. Battery is also good. Frustrated!
    • RBonds007
      2019 Cub Cadet Challenger 400, trailer to transport the Challenger, and new, never used winch for sale
      By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...