Quantcast
Jump to content


Blinded by dash lights?

TapBoss

By TapBoss
in Massimo UTV SxS Forum

 Share

Recommended Posts

TapBoss Collaborator

TapBoss

Posted
Posted

So during hunting season the dash lights on my TBoss were so damn bright I could hardly see where I was going when driving out for morning hunts.  Resigned myself to putting my stocking cap over it until last weekend.  While sitting in my stand, got on Amazon and ordered this:  

https://www.amazon.com/gp/product/B09DY1ZHKS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

A little measuring and a pair of scissors and I can see again.  It is difficult to read the cluster in daylight, but perfect at nighttime.

  • Like 1
Joe Breaux Mentor

Joe Breaux

Posted
Posted

maybe..  Im just happy to be able to go more than a mile without overheating now .. Turns out, if you mix in a few quality YAMAHA parts  with Hisun, and modify a few more, you get a decent machine.   Mine is running well now.. Just basic maintenance  required ... and I use it every weekend at Whiskey Bay ... BUT I wont ever buy another Massimo... Next time it will be HONDA. I have 4 Honda ATVs... they are indestructible.. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • TapBoss
      TBoss Enclosure
      By TapBoss
      So I’d been shopping for an enclosure for my ‘21 TBoss pretty much since I bought it. Then they came out with half doors and that’s the only one that I could find. Then the other day I ran across one on Amazon for half the price of anything else I’d seen. The link is below and I’m pretty impressed by how well it fits. There is one Velcro strap on the top of the door that doesn’t line up well with the roll cage, but I’ll work around it. 
      https://a.co/d/09ACQ191
       
    • Jamie 67
      Why is there 2 different length keys for my tboss 1000
      By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • MilSurpYinzer
      Altering running lights
      By MilSurpYinzer
      Anyone decent with electrical work that knows a good tutorial on how to make my running lights switch off all together but also turn back on when I need too? I'd assume that my lights are hard wired to the battery or the fuse panel.
      Vehicle is a Kawasaki Krx 1000
      I'm looking to ad IR driving lights for night vision and short of just putting black tape over the lights I feel this would be a more efficient option and it would be cooler. 
    • jugliner
      2020 UT400 surging after sitting for winter
      By jugliner
      I have a fuel injected UT400 that will start and idle, but surges and sputters at higher speed.  It has been sitting for 2-3 months and was fine when parked in garage.  I assumed it was a fuel/air problem and pulled the throttle body and cleaned it up.  I've ended up replacing the injector, IAC valve, MAF Temp Pressure Sensor, and fuel filter.  I've also checked the spark plug, Still surging.  I reset the ECU after every component swap.
      I plan to pull the throttle body again and look evrything over for any visible leaks, etc.
       
      Any suggestions would be appreciated on next steps.   The problem developing after sitting makes me think it should be something simple, but I'm stumped.  BTW the fuel was fresh and treated with Stabil.
       
      Thanks.
    • bcorneliusen
      2017 Mahindra mpact 1000 S Diesel - Indicator lights Gauge wiring
      By bcorneliusen
      Hi, 
      I have recently inherited a 2017 Mahindra mpact 1000 S Diesel flexhauler. The small silver-bezeled indicator gauge on the dash is no longer working since the wires were accidentally pulled from the back. I have managed to connect the correct wires for the seatbelt safety but most are still unplugged. Any pics or a wiring diagram for that gauge would be helpful. 
      Thanks!

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...