2020 Can am Maverick X3 Turbo RR with Hand Controls
-
Similar Topics
-
-
-
By Tim Barbero
I left my 2020 axis 500 UTV parked under the carport for about 6 months and when I went to start it recently a squirrel has built a nest under the throttle body and chewed through the efi harness. I stripped all the wires back and reconnected them with waterproof butt connectors. The problem I have is there is one blue wire with a red stripe coming from the main harness this wire has 5 volts dc showing on my multimeter but there are two blue wires with a red stripe coming from 2 different sensors on the throttle body. I looked through all of the bits and pieces of wiring left behind and there’s no indication that the three wires of the same color were all tied together. Any help with this issue would be greatly appreciated.
-
By Chesterl35
Hi I just bought a 2020 tracker 800sx crew and looking for a lift kit. It's an identical twin of the 2019 Textron prowler pro crew. It has decent ground clearance at around 11 inches but with the long wheel base of the crew it tends to drag it's belly a good bit. I'll probably end up making one but just seeing if anyone has seen anything yet. Thanks
-
By Karlibob
I have a 2020 800 sx with about 16 hours on it. From day one I have heard a clunking noise from the front end going over bumps. Has anyone else experienced this? Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that. Thanks, gary
-
-
-
Similar Tagged Content
-
Gallery Images
-
-
-
-
-
By plumber, -
-
-
-
By HiSUN PROBLEMS, -
By TomWA, -
-
By stevozz, -
By ricksrb, -
-
-
By Hammerdn, -
By Travis, -
By islander83, -
-
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.