You can post now and register later.
If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.
Bought my 2009 Yamaha Rhino, (fuel injected of course), recently from the original owner. Only had 500 miles and 70hrs. Starts reliably, however, it will not idle but about 50% of the time. Also, when driving slow in low or high, that is to say, relatively low rpms and below about 10 mph, it bucks and almost wants to die..... not smooth at all. However, at speed (say 12-15 mph or more) it runs very well, like it should. Any ideas?
New owner of a 2025 Bighorn Timberland 450LX. Looking for a link for a service manual for it.
Not having any issues, but I like to have them on hand for my equipment.
I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
View File
Axis E1 UTV Owners Manual
Axis E1 is a 48V all electric UTV. It is a rebranded Hisun Sector E1 and is mechanically the same except for some cosmetic differences.
Submitter
GNFO
Submitted
02/05/2026
Category
Other UTVs
I just purchased an Axis Pro 750 from Lowes. I have two questions not covered in owners manual. 1: In the glovebox there is a 12V connector, it is HOT with key off, is that for a battery maintainer to be plugged in or what is the purpose? 2: In the instrument cluster there is a digital read out for hours, miles and odometer, there is also a digital readout that is flashing, it can be adjusted and looks like 1 - 24 what is it?
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.