Quantcast
Jump to content

2020 coleman HS 400 Grease areas


Recommended Posts

Hi all! I have an annoying metal on metal sound coming from the back end at slow speeds, this thing is still pretty new less than 100 miles. I went on the hunt for the  grease fitting in the back but could only find 2 and the were fine , but I was thinking there must be more. While I was at it I also checked the front  and again only found 2 . Is that all there is and if not does anyone have a drawing  or can tell me where the others  are? I went through the manual and there is nothing on  them and can't seem to find anything on line about them. I was thinking it could also be the breaks, as the sound gets a little louder when you apply the breaks,  but its still like new or  maybe the parking break isn't fully disengaging.   Anyway , thought I would start with the grease first, Appreciate any help with this.

Thanks

Rob

Link to comment
Share on other sites

  • 3 weeks later...
On 6/23/2022 at 6:10 AM, aefron88 said:

I attached a screenshot from the manual of some grease points (steering knuckle, steering shaft, and sway bars).

In addition to those pictured both driveshafts have greasable u-joints and I believe the upper/lower a-arms have grease points on the frame side.

Screenshot_20220623-070854_Samsung Notes.jpg

Thank you , this a big help , I knew I was missing some. How did I miss this in the manual...wow!   appreciate the response , thanks again

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
    • By donny
      Hey everyone new to forum I have a 2014 Odes raider and a 2009 Suzuki Ozark 250 both down atm 😔
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
×
×
  • Create New...