Quantcast
Jump to content


2022 Hisun 750 Afraid to drive it

Roadstar515

By Roadstar515
in Hisun UTV SxS Forum

 Share

Recommended Posts

Roadstar515 Enthusiast

Roadstar515

Posted
Posted

I have been spending a lot of time reading all of the negative things about our machines and now I’m afraid to put any time on this machine not knowing when it’s going to fall apart or leave me stranded somewhere. I can’t believe that Hisun can get away with selling such a piece of shit according to most of you. I guess when your trying to save a little money and opt to buy something that looks to good to be true is just that. Pretty sad that I have to look forward in spending additional money and get no support from a company that has a 2 year warranty that I won’t be able to use. I’m surprised that they can stay in business with a reputation like that I’m reading. Just my 2 cents. Very disappointing to say the least. All I can hope is for a little good luck with this POS. I’m mechanically inclined but didn’t want to spend my riding time fixing it.

RICK

  • Like 1
Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
26 minutes ago, T-boss 410 said:

Look at it this way. You're not getting any enjoyment out of it just sitting there. You gotta try it sometime.

Yes, I was just saying that as a figure of speech. I riding it but not real confident on whether or when it going to get me stranded. Just wish I did more research before the purchase of this one. Thanks for your input, much appreciated.

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
5 hours ago, 777 21 said:

I have a RK Hisun 750 for 8 months now with no problems at 900 miles .. I trail ride haul firewood play in the mud ..  43 mile trail ride with 5 people in it and no problems .. I also have a Wildcat 700 sport and love both !4293F390-38F3-4DE6-8F2C-AC4EDA90A491.thumb.jpeg.d38a9ff6cba62bb3a978686ae6fb29f8.jpeg

What are your passengers sitting on in back. Is that a removable bench seat or what. Please let me know if it is and where you purchased it. I need to have something like that for additional seating that’s safe as well. Don’t want to lose anybody when I make a sharp turn, lol

Thanks, Rick

Link to comment
Share on other sites
Doug Thomas Rookie

Doug Thomas

Posted
Posted

I have a 2016 Massimo 500 Made by Hisun and it is a beast. I have worked the crap out of it hauling dirt, rocks, firewood, brush, etc. I have pulled up smnall trees with a snatch block on the winch. In short, I have done everything I can think of to break this thing and it still goes.  I can't relate to the naysayers  except that it doesn't run quite as smoth as a  Honda or shift as smooth as some of the others but that's the $4000.00 trade off. 

  • Like 1
Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted

Doug, that’s great to here another good thing about these. Feeling a little better about my decision and hopefully it doesn’t prove me wrong seeing I had a Polaris on order since December and they still couldn’t tell me a delivery date so I decided to get my deposit back seeing I wanted one since then. Like you said I save quite a bit of money. I realize the quality of Polaris verses Hisun but for what I need, hopefully this will do the trick

Link to comment
Share on other sites
777 21 Newbie

777 21

Posted
Posted
On 6/17/2022 at 5:44 PM, Roadstar515 said:

What are your passengers sitting on in back. Is that a removable bench seat or what. Please let me know if it is and where you purchased it. I need to have something like that for additional seating that’s safe as well. Don’t want to lose anybody when I make a sharp turn, lol

Thanks, Rick

Amazon Quadboss UTV Jump Seat (Black) https://a.co/d/iznEvyj comes with seatbelts also 

Link to comment
Share on other sites
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • didgeridoo
      Hisun Sector e1 Battery replacement: any tips?
      By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • redneckred
      Gremlins in the machine
      By redneckred
      I have a 2012 Bennche Bighorn 700X.  I bought it used.  It had been sitting in a field for several years untouched.  I put a new sun gear in the shifter, new shifter linkage due to the old one having been patched, and a new battery (and of course fresh fuel).  The machine cranked and ran beautifully.  I had it over a year and then the machine quit running.  As it would not stay cranked, I narrowed the problem down to a bad IAC valve.  I replaced it and it ran as good as new/old.  Fast forward, the machine started to act like reverse wasn't catching and would not always back up when in gear.  Then forward quit.  I assumed a bad CVT belt and got one.  Started removing the bolts from the cover and (3) just turn in the housing without coming loose.  (2) are on the bottom, so very little room to do anything with them.  I tried cranking the machine again to see the belt move since I can move the cover enough to see the belt and now the machine will not crank.  It turns over fine.  It gets gas to the injector and has spark.  I can spray cleaner down her throat and she would run until it ran out.  I have replaced the IAC twice and put a new injector with no change.  I went out and put the old injector back in to see if that made any difference and, well, it did.  I tried to crank the machine and the starter is stuck trying to turn the machine over even with the key off.  I have to disconnect the battery to stop it.  Before I shoot this thing, what am I missing?  Is this an ECM problem or something else I am not seeing?  Been dealing with these Gremlins for over a month now and weeds are starting to overtake the motor due to it not moving.  I would love to get the thing running first and any ideas of getting those CVT cover bolts out would be extremely helpful.  Thanks in advance.
    • John M in Louisiana
      Hisun E1 Power Plug Replacement
      By John M in Louisiana
      Quick question about replacing the plug.  One of the prongs pulled out, so I'm thinking it will be an easy fix to connect the old cord with a new plug but I'm unsure about the specs.  15amp 125v?  Is it more complicated than that?  I do plan to buy a plug that's water tight.
      Thanks in advance!
    • A P
      2022 Hisun Sector 550 eps. Power steering not working
      By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • John Gubancsik
      Coleman UT400; Hisun HS400
      By John Gubancsik
      I started my UT400 but forgot to buckel my seat belt.  It bogged down and then died.  Only way I could restart it was to press the gas pedal and if I let up on it, it stalls.  Any suggestions?  Thanks.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...