UTVBOARD Classifieds & Product Info
Forums
-
- 881
- posts
-
- 22
- posts
-
- 66
- posts
-
Latest Posts
-
Now 8 months...........no change, no contact from hisun -
By scott ryan · Posted
Tried to reply to this topic previously, not sure why it didn't go through. I think your model is fuel injected, you might try a new fuel injector. I've read where they can be sensitive to the spray pattern thus causing start issues. -
Update on resonator mods: After about 6 months I developed an exhaust leak. I don’t know if it is at all related to the mods, but I had to replace the transition pipe between the muffler and exhaust manifold (braided stainless flex pipe), along with the gaskets on each side. I think it was typical corrosion failure, but one thing I noticed during replacement was that one of the exhaust manifold retaining nuts had come loose. That may be related to the additional mass and resonance on the muffler, particularly if the nuts weren’t fully torqued originally. Anyway, if you add any silencer piping past the muffler I recommend you check the manifold nuts for tightness. -
Northern Tool.m, but they no longer stock those particular seats. I believe they are forklift seats.
-
By AaronD1982 · Posted
Here is the part that got put in, it came with a new voltage regulator as well.
-
