Report your UTV rides here. Please post as much information, location, pictures, etc..as you can. Post Riding area inquiries. Find out where to ride that UTV!
There is a recall on this now. They replace the shifting cable. My 2022 has the new cable but you still have to be aware of what gear you are in when placing it in park.
Hello
I have a 2022 Massimo t-boss 550. I’m looking for a fix for my timing problem. It keeps getting out of timing. Now I’m trying to find the proper parts for the linhai motor. I’m looking for tensioner chain and gear. If there’s anything else I can do to fix this issue please let me know. Unfortunately I can’t afford to get something better so I got to get it fixed. Thanks in advance.
Don
Couldn't tell a lot from video.
Did sound like a little bit of a miss.
In the dark check to see if the plug wire is arcing. Check connections for coil and spark plug. Maybe check and re-gap the spark plug.
Good luck and keep us informed.
I'm having a similar issue with my Axis 500. It seems to bog down and struggle, particularly on inclines/hills (see video). Frustratingly, it also only happens intermittently, more often when the machine has been running for a while (I use it for farm work only). So far I have:
Replaced fuel filter
Replaced fuel injector
Replaced MAP sensor (reset ECU after)
Replaced spark plug
Verified air filter is clean
Verified no obstructions in exhaust
I only run it on 91+ gas and put a can of seafoam through it to no avail
I did previously have an issue with a failed one-way bearing, but this particular issue predates that failure. I replaced the one-way bearing a few months ago and inspected the wet clutch, primary/secondary clutches and belt while I was in there-didn't see anything of concern. Where do I go from here?
IMG_9433.MOV