ruesch95

Will Utah UTV need a permit?

Has any one thought about some stickers that said utvboard.com? Way for more people to find the site?

You guys are lucky! It's 44 now, this morning when I went to start the truck, it said it was 20!!!!!!!!!!! I hate the cold!

Any one else get some? This pic is from about 2 weeks ago, now there is about 2-3 inches.

How about coming to Farmington with the Joyner crowd. You are welcome and we would enjoy seeing your rig! Details on the Joyner Forum.

rocmoc n AZ/Mexico

Damn! I just read when it is, and the vacation time I took is the week after. I'm going to try to change it for I can go.

Thanks! I'll try to get out there. I need to run and get a new battery

Any one?

Will a voltmeter connected strait to the battery drain the battery? If so, how would I wire it so that it only turns on when the key is on; with a wire tap?

I found a "universal" sensor from Summit Racing. Will it work if I drill a hole in the tank, mount the sender in it, and run the wires up to a gauge in the dash?

Here's the link for the sensor:

http://www.summitracing.com/parts/ATM-3262/

We are a Ruesch dealer in Arizona. We have developed a set of half doors for the Ruesch that works with the foot bars. Check them out on our web page. www.noisy-toyz.com

Cool, thanks!

I havn't been up there in years. Maybe I should go up there Saturday and put around. What were the temps like?

I LOVE mine! Haven't had any problems with it (except the dealer).

I took it on the elk hunt and had no problems then around the 30th of October its going on the deer hunt.

The only thing that was a problem was tuning the carb for the area's I ride in; but the new Panther is Fuel Injected.

Let us know what you do.

I do keep both in the under seat storage. Different sized zip ties. Also radiator stop leak, and quick steel

What do you all use for a toolkit and whats inside?

I got a cheap yellow and black box at Harbor Freight (the best store ever) to match my Ruesch.

8-17mm sockets (1/4'' and 3/8'')

3/8'' drive ratchet

1/4'' drive rachet

vice grips

channel locks

screwdrivers

hex bit sockets

duct tape

loctight

gasket maker

hammer

fuses

penetrating fluid

cordless impact

ect..

I almost got the my Ruesch done! I put in the following:

Dual AM FM Cassette W/AUX input

2 VR3 6 1/2 '' 3 wat speakers

2 Metra baffles (cheap weather proofing)

Sunpro Gauge pack. Water Temp/Oil PSI/Volt (need help with oil psi and water temp)

2 Baja Lights

Custom Shifter knob

3000 lbs winch

Currently Doing:

Underseat storage

windsheild

Rhino liner bed

grip taping

Will upload finished pics tomorrow.

Sure, Try Rhino 660 2004-2006 Doors.

Remove foot bar and instal doors!

The Ruesch Side By side accepts many Yamaha / polaris Parts- accessories. And equally as nice many of the Ruesch upgrades work on a rhino!

cool thanks!

It has a plastic tank. The only gauges there is is a (1) speedometer (2) tach (that dont work) (3) water temp.

Thanks for the response!

Dose anyone know or or have a hood and grill for a 2002 Kawasaki Mule 3000 for sale?

Thanks

welcome

The first time out, maybe 10-15 miles. When I got back to the trailer, 3 out of the 4 windshield bolts were missing, and a hex bolt to the rear cage. After that, I stopped at Home Depot and got some lock washers and then went and got 4 things of blue Loc tight. Best $20.00 I ever spent

Pictures please or you didn't buy it ..... LOL

I'll try to get pics tonight of it. My camera fell in mud on Saturday and I think it died, so off to Wally-World!

Wow! $100!!! What a deal.

It was, but it needs alot and I mean ALOT of work. No bed, motor in pieces, wiring screwed up, cab in pieces. I'm scared to star on it and realize I lost $100 bucks on some scrap iron.

I want to put a fuel meter on the dash of the Ruesch. Is it possible to get one from Jegs or Autozone that would work?

I picked up a 2002 Mule today on a local classified listing for $100! It need ALOT of work. Has some of the engine. I thought about throwing a 700cc FI Arctic Cat snowmobile engine in there but I thought I would ask other Mule guys if they think it would work before I jumped the gun on a motor. Any ideas or suggestions will be greatly appreciated. Also any one know were I can get dash and body panels on the cheap side?

Thanks

Has any one thought about starting a rally for Ruesch owners?