Search the Community

I have a 2021 Kawasaki Mule 4010. I need more ground clearance so I'm looking at 2" lift kit and bigger wheels/tires. Does anyone have experience adding these items to this model Mule? Any problems? Suggestions? Thanks

I own a 2013 kawasaki mule 4010 diesel 4x4 and I've replaced the wheel bearings in the left front 4 times over the past year. Twice with oem bearings and Twice with aftermarket bearings. Any help would be greatly appreciated.

Hi All- Long time reader, first time posting. I have a 2016 Mule 4010 (model: KAF 620V). I am having an issue since overloading the payload a couple days ago (yes I'm a dummy). I live on a very hilly property and I was trying to move some large oak rounds for firewood splitting. I put WAY too much wood in the bed and when I started driving, it sputtered, kicked out of gear, and then cut out. I unloaded all the weight and started it again - appeared to be running fine when idling and/or driving on flat ground at slow speed. But when try to go fast or uphill, the RPM's rev high and it sounds like the motor is fine, but it has ZERO speed or power at all (literally creeps uphill at like 2-3 mph and won' go faster or take any weight), and has no power at all. Other info: 3 weeks ago I did a belt replacement. So I was worried I perhaps screwed that up somehow. But I just opened the clutch housing to check and the belt and clutch appear to be working just fine.... sooo..... Any ideas what I screwed up by overloading payload and immediately trying to drive uphill? Any tips would be greatly appreciated!

My 2014 mule has all 4 25x11-10’s. Mule has 2” lift kit installed. I need new tires. I found a fantastic new set of 2 25x11-10 and 2 25x9-10. Will the 9” work for the front? If so whats pro’s con’s of not having all 4 the same. I have the oem 10 “ rims.

Is there a sensor on the machine that governs the idle. If so, I think its bad. I just changed the fuel filter and now it runs better and will idle some but often dies when shifted into drive. If I raise the idle too much it grinds when shifted into drive. I would love to change the sensor if bad but have no idea which one it is.

I have a 2014 4010 trans 4x4 (KAF620REF). Are the rear left and right driveshaft assemblies the same part number? I ordered the two sections individually for the rear right & they are coming up too short in length. Possibly the wrong parts ordered by the dealer? Thanks in advance.

Hi all, I am looking at putting in a dual battery setup to my 2015 Mule 4010. Anyone put one of these in before? Most of the research has pointed me to the True Am kit. Didnt know if anyone had done this or had a battery strap down tray they recommend or anything. Between the Winch and the Stereo...and upcoming lights I want to be able to make sure it always starts. Thanks in advance, -Andrew

Just got a Champion 2000lb winch for Father's Day. Going on a 2018 Mule 4010 Trans used on the farm. Anyone have any experience/ tips for mounting? Front mount so what do I need? Thanks in advance.