Quantcast
Jump to content

Coleman u400 2021 won't turn over


Recommended Posts

Bought my coleman u400 from TSC last year, was running great. I live on a lake and use it almost daily to climb a pretty steep hill from my house down a path to the water. Last week was driving up the hill and it just quit. First thought was I'd run out of gas but it has almost a full tank of gas in it.  Have tried to get it to restart and the lights come on and it tries to turn over but won't catch. Checked the battery and tried to jump it just in case but it's not that. Checked the starter and it's good. Can't find the spark plug to even check that. I called the local repair guy in town and he told me he doesn't work on Hisun since it's all shit and I'd be better off burning the damn thing so that's been no help. Would appreciate any other ideas. 

Link to comment
Share on other sites

Explain the process on checking the battery please.

Not familiar with that machine but the owners manual should tell where spark plug is.

The battery needs to have a charge of about 12.6 volts to be considered good. Less than 12.2 and it probably won't kick in the starter. 

The stator charging system is not the best. 

Can you hear fuel pump?

Any codes on dash?

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By wnc woods
      Is it possible to add a low gear to the Coleman ut400? If so please help. Ty
    • By DLJ
      Have a Hisun 800 it runs for about 35 minutes then stalls. Crank's over but has no spark. Let it sit for 15 to 20 minutes and it starts and runs again for about 35 minutes. Changed the CDI / ECU controller and still does it.
    • By buckrub
      Hey guys! Newbie here. I'm an old man who's better with plowing a mule (4-legged kind) than these newfangled beasts. I, and a friend of mine, just bought new Coleman sxs and are having to finish the assembly. I've been reading on this site and I'm falling on the mercy of you experts. The only way I'm an expert is that an "ex" is a has been, and a spurt is a drip under pressure. LOL First off, the 2 buggies have no ignition switches. They seem to mount on the dash, not the opening in the steering wheel shaft cover, so we ordered new ones that are supposed to fit. They are 8 inches long, and have a 4-wired white plugin which is slightly rectangled when looking at the end of the plug. The trouble is there's nothing to plug into. There is a three-wire grey plug close enough to reach the four-wire plug, but of course, they are not compatible. 
      Secondly, the blinker, light, ect. unit on steering wheel just spins around when touched. I see no way in heaven or earth to secure it. I've looked at a diagram on the Powersports site, but can't detect how it mounted. Fellows I'd be so grateful for any help with this. Me and my mule will even plow your garden for free, for your help. LOL 
       
    • By MOTORHEAD1959
      ATV just clicks when trying to start. Battery is good, has a new starter, and all the wiring looks good. any suggestions on where to go from here? thanks 
    • By ETHIEL
      Spark plug keeps fouling. after 10-15 minutes of running any ideas what to look fore 
×
×
  • Create New...