Quantcast
Jump to content


Recommended Posts

Posted

I assume you looked thru all the 500 manuals  in the download section and theyre all for the carbed version?

It should be substantially similar to the 550 model, all the EFI, and mechanical is essentially the same AFAIK just a slightly different size piston, infact all the Hisun models are very mechanically simila, with differences in bodies, accessories, and minor driveline changes due to spacing requirements.

Do you have anything in particular you need help with?

Posted

I see that the 500 and 550 are almost the same. The 550 can give error codes from the dashboard, I don't think the 500 can, not the same dashboard. . Trying to find out why the motor is losing power/fuel and need info on parking brake replacement.

All the info in the 500 files are for carb motors.   I am thinking that not many 500's were made before they switched to the 550.

I like to do my own work, but hard to do it without good tech info

Posted

They use the same EFI system controlled by the Delphi MT05 ECU.

Mechanically they are all similar, I would be surprised if your unit will not spit out error codes like the rest of them.

Go ahead and give us more details of exactly whats happening and maybe we can point you in the right direction.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Kierobi
      Have a MSU 500 that we got from my wife's uncle a while back. We've had it running and hauling around the property but it stopped a few months ago after what I thought was running out of gas and I'm just getting to looking into it. 
      Had fuel to the injector but nothing coming out the injector so swapped with new injector and installed inline filter in the supply hose from fuel pump. Tried again and still nothing but noticed this time that I can't hear the fuel pump priming. 
      Pulled off the electrical connection and I'm getting 12V to the fuel pump but it won't run. Put it on a test bench and got it to run so put test lamp between +ve and -ve terminals on the connector and nothing. Checked against the passenger seat securing post and get a light. 
      Tried chasing the wire back and think that the ground is through the ECU but not 100% sure. Can someone confirm for me? And if it is through the ECU, is the ECU just grounded against the frame or is it wired through to the battery?
      Thanks in advance and hope this all make sense!
    • By Hunterman22
      Can anyone please tell me or send a link as to how & where to hook up a code reader to my 2021 Hisun 500 Axis.  I have a 6 pin to a 18 pin  adaptor and the blue cord VAG KKL adaptor .Just not sure where or what to hook up to. Can I use your typical vehicle code reader or do I need to download something on a laptop or PC???
       
×
×
  • Create New...