Quantcast
Jump to content


Winch

plumber

By plumber
in Joyner UTV SxS Forum

 Share

Recommended Posts

brostar Proficient

brostar

Posted
Posted

plumber, I had a look at the specs and price & it's all good. When I 1st saw the photo I must admit it was over-kill but they are mini-monsters for ATV and Utility Vehicles. Makes good sense to me----------enjoy.

Cheers Mike

Kinarfi Veteran

Kinarfi

Posted
Posted
Ok I must be having a blonde moment, I can't get the link to work. Kinarfi can you post the pictures?

Cinda

Me blonde 2 couldn't get link to work either. Plumber, do you hear us? :)

Forbidden

You don't have permission to access /96/5/63/4/2707563040104805325KtMPvL_fs.jpg on this server.

Is this what you got Cinda? Maybe the server thinks is porn or something bad, brostar seems to have been able to see it. Brostar repost plumbers picture, please.

PM'd plumber so he can us trooperfolk web shots.

Kinarfi Veteran

Kinarfi

Posted
Posted
I bought me a new winch a Mile Marker pe4500 it's a monster I mounted it on a winch cradle Made a plate with a 2"receiver so I can use it in front or rear I hook it to a tree in my yard it pull me with me putting on the brakes I'm going out riding this weekend to see how it works in the mud Here is a pic. http://image96.webshots.com/96/5/63/4/2707...25KtMPvL_fs.jpg

That's a monster, can you hang your trooper in a tree? :D:blink::lol:

Must done something the photo came up, Thanks

plumber Proficient

plumber

Posted
  • Author
Posted

Sorry about that I post it in trooperfolk so from now on it should work Cinda you need one of these for your T4 I paid 331.52 deliver to my front door.Kinarfi yes it will pull it up a tree so I can bird watch ha ha

brostar Proficient

brostar

Posted
Posted
Me blonde 2 couldn't get link to work either. Plumber, do you hear us? :)

Forbidden

You don't have permission to access /96/5/63/4/2707563040104805325KtMPvL_fs.jpg on this server.

Is this what you got Cinda? Maybe the server thinks is porn or something bad, brostar seems to have been able to see it. Brostar repost plumbers picture, please.

PM'd plumber so he can us trooperfolk web shots.

I think it's been sorted by now but I too received the forbidden access page. The way around it is to push your reload button & bingo. Kinarfi, I forgot to log out again so you may of hung around for a reply, sorry about that.

Cheers Mike.

plumber Proficient

plumber

Posted
  • Author
Posted

Cinda I made a plate with a 2" receiver hitch the plate bolts to were the old winch is at but to bolt the winch in the same place it's to big it has to go out side like mine. They also have a pe3500 that looks good that I think it would fix in the same place as the old one.You would have to check the spec. to see if it would fit I pick this one for the 80 ft. cable and the 4500lbs that it pulls

Paiute3 Proficient

Paiute3

Posted
Posted
Cinda I made a plate with a 2" receiver hitch the plate bolts to were the old winch is at but to bolt the winch in the same place it's to big it has to go out side like mine. They also have a pe3500 that looks good that I think it would fix in the same place as the old one.You would have to check the spec. to see if it would fit I pick this one for the 80 ft. cable and the 4500lbs that it pulls

Thank-you Plumber.

Cinda

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • mrpro
      Coleman UT400 rear shock height adjustment
      By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • OBL
      can-am 2017 commander 1000xtp cannot get BUD'2 program to connect
      By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • Fmaxiron
      Can-Am spare parts?
      By Fmaxiron
      Hit a rock last weekend and trashed my front A-arm and axle on my Outlander. I’ve been looking around for reliable sources for replacement components. A lot of listings online look a bit hit or miss, so I’m trying to figure out what’s actually worth trusting.
      Has anyone here had good luck with dealers or sites where you can buy genuine Can-Am spare parts online without worrying about quality issues or fake OEM stuff? I’d rather pay a bit more and get the right fit than deal with problems later.
      Any recommendations appreciated.
    • rdc
      Looking for the left side shaft carrier where the rear bearings go for a 2014 1100cc sand viper, I understand an 800 cc carrier will also work.
      By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...