Quantcast
Jump to content

Coleman outfitter 400 Bogs Down After 10 Minutes

Randy d

By Randy d
in Coleman UTV SxS Forum

 Share

Recommended Posts

Randy d Newbie

Randy d

Posted
Posted

Looking for info on this new utv I bought and it has 38 miles on it now but the problem is after 10 minutes of driving it bogs down and I have to full throttle it to get it going I can let off the throttle and slowly get it going without bogging to much but it still does and when I give it full throttle it smells like sulfur. I'm leaning towards catalytic converter but it's still new. Any thoughts. 

Link to comment
Share on other sites
  • Alex changed the title to Coleman outfitter 400 Bogs Down After 10 Minutes
aefron88 Community Regular

aefron88

Posted
Posted

There's no cat on these things.

If I had to guess the engine temp sensor is bad and once warmed up is giving a wrong temp, causing the fuel map to not adjust.

Here's my post about how to get the diagnostic tool working for around $25 in parts. You can see what each sensor is outputting so you don't just throw parts at it. I would expect in your fase the engine temp sensor to be reading cold when the coolant is actually warm.

Get the tool going and see what it shows and post and we can help you troubleshoot further from there.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Alien10
      New here, thanks for letting me join.
      By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • sister sweety
      New member here
      By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • Buddee
      2010 500 - New Carb- Hesitation
      By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • ATRican
      New here from PR
      By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
    • great8redsfan
      2017 Challenger 500 No power on take off or hills
      By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...