Quantcast
Jump to content


Recommended Posts

Posted

I was hoping to see some of you Trooper folks.

Besides myself there were three other Joyners, a T2, a T4 and a Commander. I didn't see much of the other T2 as I was busy organizing the Saturday field event. The T4 did try the mud bog but needless to say the long wheel base caused him a problem.

The trail rides were a real eye opener for those that had never seen a T2. The only problem I had was on some of the water bars. The idiot that cut them made some of them 3 and 4 feet high. Even the RZRs were high centering. I managed to bust holes in the lower panels on both sides. I'm hoping I can get a couple from the Joyner bone yard.

The sponsors made the trip worthwhile, even if you didn't ride. They came up with about $35,000 in door prizes and other goodies.

Hope some of you can make the Jamboree next year.

Gumball

Day 1 -

http://picasaweb.google.com/emehiser/Wed99...LGVvLKDoZSKvQE#

Day 2 -

http://picasaweb.google.com/emehiser/Thurs...OjWzc7g35DB2wE#

Day 3 -

http://picasaweb.google.com/emehiser/Frida...JXrpb3FoofctQE#

Day 4 -

http://picasaweb.google.com/emehiser/Satur...KCbhbK926jIiwE#

Posted

Gumball, I enjoyed the photos. Looks like you had a good time. Not many pics of your Trooper there, but if your like me, always filming or taking photos from my Trooper of where I'm going, or of other people. That mud looked familiar. Have you got a canvas enclosure? I find them great in the mud & rain. Anyone with a stock canvas enclosure should install a zip for the front screen.

Cheers Mike.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By OBL
      program will open in old Bud program only/ but will not go in BUDS 2 to let use program ECU problem working on has new engine/ new fuel pump/ injectors/ lines/ sensors/ crank sensor maps/ and new throttle body and injectors. machine starts runs a minute dies/ on 3 rd  try says key not recognized /we put other key in and same thing happens/wait 10 minutes, you can go again/ is there a back door in the program/ also might mention unplug temp sensor and map sensor , it will run a few minutes longer / then die again.
    • By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • By HighSon
      Haven't posted in a while since solving the excessive cabin noise issue, so I thought I would share a few upgrades to my Sector... Realize that this is driven daily on the street, so some of the mods are to make it more streetworthy.

      Locking gas door.

      Rear view mirror.

      Modified windshield for better airflow in cabin.

      Lowered and modified headrest bar for improved rear view.  Tailgate protector.

      Folding armrests.

      Overhead utility rack.  Keeps the interior cooler and dryer, too!

      Folding rear seats.

      Dust cover and seat protector.
      If anyone wants links to the rear view mirror, seats, or arrests, let me know and I will post.  But know that everything requires some level of fabrication.  The utility rack was all custom built.  Cheers!
    • By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
×
×
  • Create New...