2019 polaris rzr xp 4 1000 turbo s
-
Similar Topics
-
By Jay Joseph
I have a 2019 CF Moto uforce 1000 my yellow engine light is on and I bought a diagnostics tool online I plugged it into my machine and it came back with error code O2 sensors so I replaced them both plug the diagnostic tool back in the yellow light was off. I let it sit for two days and now the yellow lights back on and when I plug the diagnostic tool back in it says O2 sensor low-voltage bank two sensor one. Does anyone know what this means? Replace both sensors with new ones. I thought I’d save some money and not bring it to a dealer, but looks like I might have to. I took my machine up to camp and it ran like crap almost like it was getting too much gas. Half throttle it was all right but climbing hills, and going over certain terrain it would just die out
-
By rich isaacs
got a 2019 articat prowler, it will only rev to 3800 rpms then says limited rpms . have switched gauge cluster with another machine. it worked fine in other machine but the other machines cluster and ecm did the same limited rpms.
-
By amiracle40995
I’m getting a 700-7 every startup. I’m having to change the plug every 100 miles on 93 octane gas. I got a lower numbered plug that is supposed to burn hotter. I’m wondering why that comes up every time I start it and if it’s related? I included a picture of the code or whatever it is. I haven’t seen the code in the owners manual or the hisun shop manual I have.
-
By BigWave
I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
Bigwave
-
By GBarney
Recently bought a 2010 RTV 1100 with bad engine. a d1105T out of a toro 5400 just came available locally. Looking for info on if anybody has installed the turbo version of this engine, what challenges/ problems were encountered, how it turned out.
Looks like nobody has any insight. I will complete installation and report back as to how it went, how it works, and what's involved.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.