Quantcast
Jump to content

CHery Engine info


mouser58

Recommended Posts

Hello Brostar,

I have left a voice mail but not hopefully as there was not a message when you call in to the number, just the telco voice message. Sometime this means a scam. I also left an email at the craigslist address in the add. We will see if this is on the up & up or a scam with bad info.

rocmoc n AZ/Mexico

Link to comment
Share on other sites

Left or right wheel drive makes me wonder. Does mitsubushi offer a truck with that. I don't see any use for it unless your rock crawling. I suspose one could put seperate brake actuators on to acheive that but that would double the gearing on the un-braked wheel. Locking up one back wheel would be nice for decreasing turning radius. Thought about doing that. I agree, it's all about torque. Don't see any need to go faster.

Lenny

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By AlaskaTrail
      Hi All,
      New to UTVs and recently accuired a ut400 from our local Alaska Commercial Co. and had a questions regarding the transmission fluid. I have had a squeeling noise, sounds like a teapot, that recently started after being driven for a few minutes. The manual says to change the fluid at 500 miles, so I was thinking maybe its just time for this to be changed. Other then that I cannot find any information regarding the type used. While reading through these forums, I seen someone put that the transmission is lubricated with the engine oil. Is this true? If not what should I be using and where can I find the information to change it out? Any input on this would be greatly appretiated!
      Thanks in advance
    • By Wesley
      I have a 2022 500 Hisun product, I have had them in the past. I change my oil myself and trying to drain through the hole where I remove the plug is a mess.  How does everyone keep the belly pan clean during the oil and filter service?
       
      Wes Jackson
    • By Clint Osborne
      Best upgrade I ever done.              2006 Polaris 700 EFI ENGINE 

    • By Slick
      I ordered one on ebay part number 19206-115-0000 and it didn't fit. It had 18mm threads where the bad part has a smaller thread size. I haven't measured it yep but I think it is probably 16mm. Any help would be appreciated.
    • By AL F
      CAN'T FIND ANYTHING UNDER 2005 THAT MATCHES  ARE THESE THE SAME   FUEL INJECTORS
×
×
  • Create New...