Quantcast
Jump to content


2022 t-boss 760 oil filter

Aaron Colona

By Aaron Colona
in Massimo UTV SxS Forum

 Share
Go to solution Solved by Aaron Colona,

Recommended Posts

Aaron Colona Newbie

Aaron Colona

Posted
Posted

Just bought a brand new 760 about a month ago. I'm at 20 hours which the book says is when you need to change the break in oil. 

 

I must be crazy, but I can't find the oil filter. I've googled a million videos...everything seems to be 2019 or lower...and/or a 550.  They all show the filter easily seen by looking in past the rear passenger tire on the engine. There is absolutely nothing there on mine. 

 

1.there seems to be very little info if you Google a 760, or anything Massimo newer than like 2019. 

 

2. Does anyone have a current model year 760 that can answer my riddle for me? 

T-boss 410 Experienced

T-boss 410

Posted
Posted

Don't know if this will help, but I have a 2019 T-boss 410, and there's no oil filter. I understand that there's a big difference between your 2022 760 and my 2019 410, but if you look under the engine from under the machine, you should see a hole that is where the drain plug is located. There's no oil filter (disappointed in that), but there's some sort of spring on the drain plug.

I have wondered if there's some way to engineer an oil filter, like maybe remotely.

 

I doubt I helped you, but maybe if you find the drain plug, you'll be able to get the answer to your question. Good luck! Let us know what you find out.

  • Like 1
Aaron Colona Newbie

Aaron Colona

Posted
  • Author
Posted
10 minutes ago, T-boss 410 said:

Don't know if this will help, but I have a 2019 T-boss 410, and there's no oil filter. I understand that there's a big difference between your 2022 760 and my 2019 410, but if you look under the engine from under the machine, you should see a hole that is where the drain plug is located. There's no oil filter (disappointed in that), but there's some sort of spring on the drain plug.

I have wondered if there's some way to engineer an oil filter, like maybe remotely.

 

I doubt I helped you, but maybe if you find the drain plug, you'll be able to get the answer to your question. Good luck! Let us know what you find out.

I did find the drain plug but I didn't drain yet cause I wanted to find the filter. It is on the very bottom. 

 

I am pretty sure I have read the 410 doesn't have a filter ..but the 550 and 750 do. I can't imagine all of a sudden the newest 760 got rid of the oil filter. 

Aaron Colona Newbie

Aaron Colona

Posted
  • Author
Posted
2 minutes ago, T-boss 410 said:

You would think it wouldn't be difficult to locate. There's nothing in the manual about it?

Tell me about it lol. I feel like a dummy or blindget this...the manual has a oil change interval and literally says "make sure and change the filter when you change the oil" but doesn't say a thing about where it is...no pictures. 

I just can't believe nobody has a YouTube video of a 760, or even a 750, I can find. I feel like I need to make one once I get this figured out cause nobody seems to have info on these. 

  • Like 1
  • Solution
Aaron Colona Newbie

Aaron Colona

Posted
  • Author
  • Solution
Posted
On 1/8/2024 at 9:20 PM, T-boss 410 said:

Well, when all else fails you can always call the headquarters in Texas. Or maybe get an email address for a technician who can help.

So I called texas and I hope this info helps others.   They DID make major changes for the new 760.  The 750 oil filter is wrong now.  The new setup is an open filter, similar to an air filter, that goes in a similar spot to the 750. There is a metal cover, with 3 screws, you open that up and then swap the filter. 

 

The massimo part number for the new filter is: 38091 

Through some digging I think I found a cross reference of that filter to a HF152 which is used in some Can-Ams and motorbikes. The OEM filter is $40 with shipping from Massimo. I found an HF152 style for like $12 off amazon. When it comes in and I'll compare it to my OEM and make sure they match and then update this post for others. 

Aaron Colona Newbie

Aaron Colona

Posted
  • Author
Posted
1 hour ago, T-boss 410 said:

So, did you actually locate the filter finally?

I see the cover he is talking about. It is right near where the external/standard filter used to be on all the 550-750 previous models.  I didnt want to open it up yet till my new filter comes in. I'm new to the forum, but I think I can attach pictures? If so I'll take a couple pics when I get it open in the next couple days. 

  • Like 1
Aaron Colona Newbie

Aaron Colona

Posted
  • Author
Posted

Okay I completed the change. So hopefully this helps someone else. I confirmed the filter matches identical, so don't go buy an OEM filter unless you wanna pay 4 times as much. They were literally identical except the filter material was a different color. 

 

So the drain is the same as older units...so is the fill (better have a super long/flexible funnel). 

 

Literally the only difference is the filter. Slightly behind oil dipstick is a round metal "cap" held on by 3 small bolts. Pull all 3 and the cap just falls off..along with some oil. Be careful, there is a o-ring that could come off...mine stayed on the motor. You just grab the filter and pull it out. Shove the new one in and you can kind of feel the rubber gasket "stick" when you push it in (only can go one way, rubber side in). Cap back on...done. 

 

  • Like 1
  • 1 year later...
Joe Breaux Mentor

Joe Breaux

Posted
Posted
On 1/8/2024 at 9:20 PM, T-boss 410 said:

Well, when all else fails you can always call the headquarters in Texas. Or maybe get an email address for a technician who can help.

If they will answer the phone..lol

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • jertex
      Shift cable problem, 2017 Stampede 900, need advice
      By jertex
      I bought a 2017 Stampede 900 last fall that was new, old stock with less than 5 hours on it thinking that I would be getting a relatively trouble free UTV as compared to buying a used Polaris or CanAm, or Honda, etc. It's been a little quirky, but reliable. What I thought was just a minor issue with this model, the difficulty in shifting between R, N, L, H, etc., was just a characteristic of this model is now a big problem. I had to climb two very steep trails to get to the upper meadow of our hunting property, which seemed to stress the UTV more than usual since I was carrying some lumber to work on a platform for a hunting blind, and when I went to shift into park, I felt something give and it would not shift out of low, but it did move up into high gear.  I couldn't get it to shift at all at that point and the shifter felt mushy for lack of a better word. I was able to get it down to the lodge and when I investigated, I discovered that the straight, metal tube portion of the shift cable had bent to almost 90 degrees (see pics). I'm positive that it had already had some deformation that had happened previously and it had the right amount of resistance to bend to the point where it was unusable. 
      I have two questions:
      1. I suspect that there must be some other issues that makes this UTV difficult to shift, and I'm wondering if this is a common problem and if someone could enlighten me on what could cause this to be difficult to shift?
      2. Have any of you had this happen and if so, how difficult is it to replace the shifter cable?
      Any other advice is welcome, this is the first UTV that I've ever owned, so I don't know much about working on these or maintaining them. I'm relatively capable when it comes to working on my own vehicles in general, and I'm not afraid to take things apart and get my hands dirty.
      Thanks in advance for any insight, I'll be traveling most the day so I won't get a chance to look at replies until this evening.


       
    • dilger
      Transmission vent leaks oil out
      By dilger
      Transmission vent leaks oil out of it after using 
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...