Quantcast
Jump to content


Recommended Posts

Posted

Our grandson, Tyler was chosen for the face of Scouting for the 100 year anniversary card By the LVAC BSA. Tyler's face will be on the Expo Cards this year. The cards are $5.00 each, are good nationwide and if purchased by March 12 the Pack will get 45% of the sale to help Tyler pay for camp, ect. The percentage goes down every week soTyler is trying to presell as many as possible. If anyone is interested in a Expo Card please PM me. We pick up the cards on March 12 and I'll get them mailed out on Monday, March 15.

If you click on the image you can see the card better.

Thank-you for supporting Tyler and Cub Scouting!

Cinda

post-103-126584614279_thumb.jpg

Posted

I forgot to say that this is a discount card, you go online to register the card put in your zip code and every where in your area that offers a discount comes up. George really enjoys going to Chevys so we use our discount there alot, the discount is $5.00 off so the card paid for itself the first time we used it. The card is good for one year and I know we have saved over $75.00 this year just at Chevys.

Cinda

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Kierobi
      Have a MSU 500 that we got from my wife's uncle a while back. We've had it running and hauling around the property but it stopped a few months ago after what I thought was running out of gas and I'm just getting to looking into it. 
      Had fuel to the injector but nothing coming out the injector so swapped with new injector and installed inline filter in the supply hose from fuel pump. Tried again and still nothing but noticed this time that I can't hear the fuel pump priming. 
      Pulled off the electrical connection and I'm getting 12V to the fuel pump but it won't run. Put it on a test bench and got it to run so put test lamp between +ve and -ve terminals on the connector and nothing. Checked against the passenger seat securing post and get a light. 
      Tried chasing the wire back and think that the ground is through the ECU but not 100% sure. Can someone confirm for me? And if it is through the ECU, is the ECU just grounded against the frame or is it wired through to the battery?
      Thanks in advance and hope this all make sense!
    • By Hunterman22
      Can anyone please tell me or send a link as to how & where to hook up a code reader to my 2021 Hisun 500 Axis.  I have a 6 pin to a 18 pin  adaptor and the blue cord VAG KKL adaptor .Just not sure where or what to hook up to. Can I use your typical vehicle code reader or do I need to download something on a laptop or PC???
       
    • By Eman85
      Pulled fuel injector to see if I could clean it or if it's stuck open. Had a slide on clip that was really tough to get off. Don't see how the clip is supposed to lock into the plastic part that the injector slides into. Any videos or pics of injector replacement? 
    • By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • By Timbo
      I never see videos of hear of people taking these things to the big trails. Do you ? I just got one and want to.
       
×
×
  • Create New...