Quantcast
Jump to content

Crankcase Breather/Oil Seperator


Az Bound

Recommended Posts

This past week I was going over routine maintenance on my Trooper and decided to check out the crankcase breather/oil seperator unit and see if it need any attention. The thing is a mess. The fine dust from the desert where I ride hardly even slows down as it goes past the cheap paper filter under the nice chrome cap and enters directly into the top end of the motor. After taking every thing apart and blowing out dust and muck where oil mist from the engine combines with the dust running past the filter I decided to relocate the unit up into the clean air.

Although it looks like a chrome martini shaker mounted to the side of my roof rack I'd rather have people ask me what it is and tell them I drink alot than have all that dust being sucked into the engine. Pull it apart and take a look, I think you'll be surprised.

Happy Trails

Az Bound

Link to comment
Share on other sites

I have more of a problem with it blowing oil out rather than letting it in, does yours stay dry?

2680519580104110397omcpWr_th.jpg

Kinarfi

Mine was dry as a bone except at the point where it enters the head. Even at the nipple where it enters the head there was only on oil mist . All of the hoses had dust in them. The canister was dusty and the oil drain hole was clogged with dirt. In the hose fitting at the head where the dirt mingled with the oil mist there was about a 1/4" of crud. So it apears that mine sucks instead of blows. There was no oil in the canister. For me relocating the canister seems to be the best solution.

Happy Trails

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • By REDfletching
      Spent today at a Honda dealership looking at their 520 side by side, then on the way home past our Lowes noticed they had several new UTVs on site, so we U-turned and ducked in there. We were impressed that all that came for $9,999 metal whole length skid plate, nice sized bed, roof, windshield, side mirrors, winch, upgrade looking tires… all of which would have added thousands of dollars to an already expensive Honda 520. Now Honda does have a great reputation from my trusted UTV experienced buddy, so it has that going for it.
    • By BOYD
      I have a 2004 KUBOTA RTV 900 DIESEL and I need to replace both front cv axels.I have been online looking at them and there seems to be a lot of different manufactures to choose from. My question is who makes a good aftermarket set of cv axels for this KUBOTA. I have read horror stories of people buying the  cheap Chinese brand only to find out they don't fit or they don't last very long and fail again. I hate to have to spend over $200 a shaft to get OEM from KUBOTA when I'm sure there is a company out there who probably makes it for them or makes comparable to OEM. Thanks for your help.
    • By Steve B
      My "R" light on the dash will not go out when I take the UTV out of reverse and put it into any other gear. Is this just the light switch issue or will this effect engine performance in the other gears?
    • By Smittay
      Looked at a lot of UTVs lately. Couple Questions about Hisun. Some people say they are just cheap with no customer service. Other people seem to have no problems with them.
      Any opinions on Hisun reliability?
      Heard parts are hard to get. Is that true?
      If you had one and didn't like it what do you recommend?
       
×
×
  • Create New...