Jump to content

Sign in to follow this  

2008 Suzuki King Quad 450 4x4 - $2400

Recommended Posts

2008 Suzuki King Quad 450 4x4 - $2400. With only 620 miles. Extremely Nice, Like New Condition. It was used very little, it was never wreaked or rolled. The atv runs and drives perfectly, the motor is very powerful and does not leak any fluids. It also hads push button 4-wheel drive and differential lock. If you want to buy it now or you have any questions contact me at: [email protected]


Share this post

Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

  • Similar Topics

    • By Neil Wilson
      I just bought a 2008 Trooper T2 not knowing much about them. On this one the owner said the horn doesn't work, the winch never did work and during inspection the rear brake lights didn't work. He said he replaced the rear light pods recently and the brake lights worked before. He said the fuse module is corroded so he bypassed it and rigged up his own switches for the fuel pump and radiator fan. I see in the wiring diagram the horn and rear brake lights are on the same circuit. Now I am worried the problem is in the wiring harness.
      I have the wiring diagram from the online manual but I can't make any sense of it. I see lots of posts about wiring issues and I am feeling a bit overwhelmed with all the issues I see with these machines and am regretting buying it.
      For now my main concern is to get the brake lights working so I can drive it to some nearby trails. I would appreciate any advice on how to go about diagnosing the problem or workarounds. Also if there is a better wiring diagram out there that might help. I would consider hiring someone local to diagnose it so any recommendations are welcome.
    • By lhcribbs
      First off the Massimo has been running great. Hasn’t missed a beat since I worked on it last.
           I’m pretty sure this has been an ongoing issue even before I got it. Towards the front of the crankcase, right of driveshaft coming out I noted a lot of oil buildup. I cleaned it up really to see if I could identify where it was coming from. It looks like there’s a seam where the two sides meet and that’s where leak is originating from. 
           From what I find in the service manual it doesn’t look like there’s a gasket here. So would anyone know how this seam prevents oil leakage? The next question is how would you correct this leak? I’ve read where you don’t want to use oil leak stopper as that will most likely cause slippage on your wet clutch. Any thoughts? 
      Thanks, Harrison

    • By Neil Wilson
      I bought a new oil pressure sending unit for my 2008 Trooper T2 (see first picture attached). When I went to install it I found out the sensor on my machine looks like the sensor for a Renegade (see second picture attached). Has anyone ever seen this? I know this is not a retro fit since because the threaded tube that connects it to the engine is a much smaller diameter than the stock part.
      What is the proper part number for the unit so I can get a replacement?

    • By Lucas Lenartowicz
      I have oil dripping off the the tube that drains the air box. I have checked the inside of the air box on a few occasions and there is never any fresh oil. So I don't know if the oil is there from any previous leaks/spills or if there is sometime i am missing. Also it is missing the oil/air separator but I checked the end of the crankcase breather tube and it is dry, even when running.
      Any help appreciated
    • By Lucas Lenartowicz
      We just got a used Hisun utv which burns oil like crazy and needs a diff seal. I'm having a hard time finding parts so far so I was wondering whether two models were the same. Our model is Supermach 700U 2008. Many times the Hisun HS700 shows up when looking for parts. So are the parts between these two models the same? Are the essentially same with different stickers on it? 

  • Create New...