By Kevin M
Hello all. I am new to this forum and new to SxS in general. I recently purchased an 16 Odes Dom 800 with the issue of a prominent knocking noise at idle and it’s very jerky in forward and reverse gears. It does not sound like an engine knock. I bought it cheap knowing about this problem with hopes of it being a cheap and fairly easy fix that I can do myself. Would a bad belt be the cause this symptom? I’m looking for a starting point to begin diagnosing and fixing the problem. I recorded a video of it but am not sure if I can post it on the forum. Any help is greatly appreciated.
Brand new Joyner CV AXLES are waiting to be unloaded at LA port and then be sent to warehouses in Charleston, TN , BALTIMORE, MD and Groveport, OH. Estimate they will be available for shipments to end customers in about 2-3 weeks.
These CV AXLES are ordered in February this year and now it is middle July. Very long time to get these parts. Qty for each model is not big. Detail as below:
S/N Part No. Description Charleston, TN BALTIMORE, MD Groveport, OH Total
1 D650.03.02.02.00 650 Sand Spider Rear left 3 2 3 8
2 S650.03.02.02.00 650 Commando Rear 7 6 10 23
3 TR1100.03.01.03.00 TR1100 Front 3 3 4 10
4 D650.03.02.03.00 650 Sand Spider Rear Right 3 2 4 9
5 S800.03.02.02.00-R2 800 R2/4 Rear Shaft 4 4 6 14
6 TR1100.03.02.03.00 TR1100 Rear 6 5 9 20
7 S650.03.01.02.00 650 Commando Front Left 3 3 4 10
8 S650.03.01.03.00 650 Commando Front Right 3 3 4 10
Below items are also available. These items can be shipped in days
1. 800 Renegade R2/R4 Front outer cage --- 5 pieces
2. 800 Viper SV1100 Drive shaft rear Left outer cage --- 5 pieces
3. 800 Viper SV1100 Drive shaft rear left inner cage --- 3 pieces
1. 650 Commando Left Front / 650 Commando Right Front /650 Sand Spider Rear Left / 650 Sand Spider Rear right / OUT CAGE 2 pieces
2. 650 Commando Rear OUT CAGE 1 pieces
3 Trooper Front / Trooper Rear / 800 R2 R4 Rear OUT CAGE 2 pieces
4 650 Commando Left Front / 650 Commando Right Front INNER CAGE 1 pieces
5 650 Sand Spider Rear Left / 650 Sand Spider Rear right INNER CAGE 1 pieces
6 650 Commando Rear INNER CAGE 1 pieces
7 Trooper Front / Trooper Rear / 800 R2 R4 Rear OUT CAGE INNER CAGE 2 pieces
Anyone who need above items please contact me at [email protected] Thanks.
Other Joyner items needed, you can also contact me and I will try to help.
Have good day
Casey / Leaf Asia
Massimo Buck 250 less than a year old. 900 miles on it. Live on beach in TX...i.e. corrosive salt air and normally mild temps.
The story - one day, it randomly quit on idle and was tough to restart. Next day, it occasionally cut out for 1-2 seconds while driving, then catch back to normal throttle. Pumped gas pedal, not sure if that helped it catch. Added some marine sta-bil and filled tank. Ran well after that for a day. Following day, wouldn't start. Turns over, cranks, but won't start. When it quit on idle that was the first time driven since we did have a freeze of ~25 degrees.
Full charge on battery. No spark. Changed plug and still no spark. Fuses look good, but fuse connection box has some loose clasps and spade were corroded. I bent clasps best I could and used dielectric on spades re-inserted. Cleaned and checked every connection I could find. Don't have a card reader to hook up, but did swapped ECU just to check that, and no change...after swapping ECU the engine light now stays on. Previously blinked and then goes away.
Under warranty but service place is 2 hrs away.
Ive searched and cannot find any performance parts that fit my machine.
I have a 2020 coleman ut400.
Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
I know these are yamaha rhino clones but are they rhino 450 clones?
Any info is appreciated.