Quantcast
Jump to content


Recommended Posts

Posted

Hello all,

I was wanted to ask if UTVs are street legal in Pike County, Kentucky, or do they make a street legal kit? We just moved to Pike county a few months ago. I know in Mingo County, West Virginia you can ride them on the street as long as you have bought a Hatfield and McCoy trail pass and I live right on the border. I always see people riding their ATVs around and I was wondering if it was legal.

Thanks

Posted

Hello all,

I was wanted to ask if UTVs are street legal in Pike County, Kentucky, or do they make a street legal kit? We just moved to Pike county a few months ago. I know in Mingo County, West Virginia you can ride them on the street as long as you have bought a Hatfield and McCoy trail pass and I live right on the border. I always see people riding their ATVs around and I was wondering if it was legal.

Thanks

Hear is what I found There is a phone number at the bottom # 4741 - KENTUCKY: ALL-TERRAIN VEHICLE (ATV) USE RULES

Kentucky law:

"All-terrain vehicle" means any motor vehicle for off-road use, which is fifty (50) inches or less in width; has a dry weight of six hundred (600) pounds or less; travels on three (3) or more low pressure tires; is designed for operator use only with no passengers; and has a seat or saddle designed to be straddled by the operator, and handle bars for steering control.

The "Rules of the Road" for using ATVs include:

  • No person shall operate an all-terrain vehicle upon any public highway or roadway or upon the right-of-way of any public highway or roadway.
  • Exception: Persons may operate an ATV on any two-lane public highway, if the operator is engaged in farm or agricultural-related activities, construction, road maintenance, or snow removal. Persons not engaged in one of these activities may operate an ATV on any two-lane public highway in order to cross the highway, but may not travel on the highway for more than 2/10 of a mile.
  • Persons who operate an ATV on a public highway must have a valid operator's license and comply with all traffic regulations; must have at least one headlight and two taillights illuminated at all times; and may only operate the ATV during daylight hours, unless engaged in snow removal or emergency road maintenance.
  • <P style="MARGIN-TOP: 0px; MARGIN-BOTTOM: 0px">No person shall operate an all-terrain vehicle on any public or private property without the consent of the landowner, tenant, or governmental agency responsible for the property, and unless the operator wears approved protective headgear, in the manner prescribed by the secretary of the Transportation Cabinet, at all times that the vehicle is in motion. The approved headgear requirement shall not apply when the operator of the all-terrain vehicle is engaged in:

    - Farm or agriculture related activities;

    - Mining or mining exploration activities;

    - Logging activities;

    - Any other business, commercial, or industrial activity; or

    - Use of that vehicle on private property.

  • The Transportation Cabinet may designate, and a city or county government may designate, those public highways, segments of public highways, and adjoining rights-of-way of public highways under its jurisdiction where all-terrain vehicles that are prohibited may be operated.
  • No person under the age of sixteen (16) years shall operate an all-terrain vehicle with an engine size exceeding ninety (90) cubic centimeters displacement, nor shall any person under the age of sixteen (16) years operate an all-terrain vehicle except under direct parental supervision.
  • No person under the age of twelve (12) years shall operate an all-terrain vehicle with an engine size exceeding seventy (70) cubic centimeters displacement.
  • A person cannot operate an all-terrain vehicle under this subsection unless the all-terrain vehicle has at least one headlight and two taillights, which must be illuminated at all times the vehicle is in operation.
  • A person operating an all-terrain vehicle under this subsection must restrict the operation to daylight hours, except when engaged in snow removal.

Division of Driver Safety

200 Mero Street, Station W3-22-01

Frankfort, Kentucky 40622

1-502-564-1438

1-888-374-8768

– May 2006, from www.transportation.ky.gov/drlic/Drivers_Manual/Sections/dm4.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Sharon
      The center console is not working, anyone know how to fix it? 
    • By KMP
      We just bought our 1st side-by-side and wanted to get tips on maintenance items we should address immediately for our 2015 Arctic Cat Wildcat Sport 700 XT.  We are truly beginners and welcome any and all suggestions.  Thank you, we appreciate your help!
    • By Outlaw Redneck
      Hello all. I have a 2005 Joyner sand spider 650 with the dreaded broken output shaft on the transmission. I got ahold of a 2007 joyner commando 650 for cheap that had a bad motor but a good transmission. I got it because everything i read said that the transmission would work but it seems that it will not. Due to the commando being 4x4 it has a selectable locker and a small ring gear using a "idler" gear to turn the ring gear which make the output spin the wrong direction. Is there any way that I can make this thing work? I really dont want a commando,  I like the buggy but if the trans wont work then I can only put my motor in the commando. Any help would be appreciated. I have the ring gear from the original trans but the shaft is broken and the shaft from the commando wont fit the ring gear it doesn't appear. 
    • By gridlock
      After three years, my Sector completely died.  Something caused the hot wire under the seat from the charger to disintegrate, so the batteries weren't being charged.  The batteries weren't charging 100% anymore, so decided to convert to lithium.
      As most others have done, I went with 4-48v batteries in parallel, as I believe that will be plenty of amp-hours for my needs, but can always add more if needed.  I went with LiTime wired CAN batteries and mounted their digital gauge on the dash above the current one, which fit perfectly.  I didn't think the existing battery brackets worked well for the new batteries, so made my own out of aluminum L rails, which makes it much more secure (and saves a few more ounces :)).  Since I wired them in a 'balanced' configuration, I had to make all new cables from 0/1 gauge wire and 8mm posts.  I updated the DeltaQ charger to profile 233. Cleaned everything up (I must have vacuumed 20 pounds of dirt!), put it all together and... wham!
      So far, it definitely is better than with the original AGM batteries.  Sustains speed better going up hills, and seems to have plenty of reserve current.  The difference in weight with 4 LiPo vs 8 AGM batteries surely doesn't hurt!
      Thanks to everyone on this forum, but special shoutout to GNFO who was a big help.
      A few questions:
      In the 'any tips' thread, EVSupport mentioned reprogramming the Sevcon to reflect the new discharge curve of the lithium cells, but I didn't see any more info about that or how to do that.  Is there any more info about that?
      Have folks replaced the onboard 12v battery, and if so, with lithium?  I'm not sure why there is a 12v battery; why didn't they just step down the current of the 48v system to provide power to accessories?
      Is there a recommendation as far as charging with the lithium conversion?  As far as I understand, it is better to let lithium batteries discharge somewhat (but not completely) than keep them charging all the time.  What do you think?
       


×
×
  • Create New...