Quantcast
Jump to content


Recommended Posts

Posted

After a summer riding brand X, which I sold, I've decided to sell my T2. I really need to sell it and will consider any offers. You can see a description of it on Craigslist,

http://tucson.craigslist.org/rvs/2719766744.html

BOARD MEMBER SPECIAL PRICE - $4500.00

It has been sitting in my garage on the battery tender for most of the year. It's time to retire from off roading, at least for now. It runs good and as usual is fun to drive.

The only thing it really needs is someone to drive it.

Gumball

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • By Ironhorse
      Purchased a new, leftover 2025 Bighorn Timberland 450LX.  
      Dealer says to change the engine oil and transmission oil at 10 hours, then oil change every 30 hours.  
      The manual says first oil change at 25 hours or 200 miles, and first gear oil change at 1900 miles.
      Are they being extra cautious?
    • By jon pino
      having trouble with a 2013 uxv500i. have replaced stator due to bad pulser coil. new unit does not work. manual value for pulser coil is 100ish ohm, measured value is 500 ohm. can anyone with one of these fuel injected later model units check their pulser coil with an ohm meter for me? left side of engine small connector next to 3 yellows. jon 605-545-7040
    • By jugliner
      I have a fuel injected UT400 that will start and idle, but surges and sputters at higher speed.  It has been sitting for 2-3 months and was fine when parked in garage.  I assumed it was a fuel/air problem and pulled the throttle body and cleaned it up.  I've ended up replacing the injector, IAC valve, MAF Temp Pressure Sensor, and fuel filter.  I've also checked the spark plug, Still surging.  I reset the ECU after every component swap.
      I plan to pull the throttle body again and look evrything over for any visible leaks, etc.
       
      Any suggestions would be appreciated on next steps.   The problem developing after sitting makes me think it should be something simple, but I'm stumped.  BTW the fuel was fresh and treated with Stabil.
       
      Thanks.
×
×
  • Create New...