Quantcast
Jump to content


Starter

charlie

By charlie
in Joyner UTV SxS Forum

 Share

Recommended Posts

charlie Experienced

charlie

Posted
Posted

Hey guys been a while since Ive been on here hope all is well. Question for you guys is there a cross reference number for a starter for the T2 I already did the whole really thing that Kinarfi was great explaining worked great for a while relay is clicking looks like I still got good ground and power so I am thinking starter is just not doing the job. So is there another starter out there that can be used or do I need to get it from joyner??

charlie

ricksrb Mentor

ricksrb

Posted
Posted

Hey guys been a while since Ive been on here hope all is well. Question for you guys is there a cross reference number for a starter for the T2 I already did the whole really thing that Kinarfi was great explaining worked great for a while relay is clicking looks like I still got good ground and power so I am thinking starter is just not doing the job. So is there another starter out there that can be used or do I need to get it from joyner??

charlie

you may be able to have yours rebuilt. I saw this add on craigslist but never purchased from them.

http://losangeles.craigslist.org/lac/mcy/2818628522.html

Kinarfi Veteran

Kinarfi

Posted
Posted

I have a spare starter, but I don't particularly trust it, it seems to me that it just didn't give me the out put that I needed, that is, it didn't seem to spin the motor fast enough, it's been quite a while since I changed it out. May you just have a weak on or a bad winding on it. have you had it tested by any one such as O'Rielly or Autozone check it? Maybe I need to have mine tested.

Good luck, let us know what happens,

Kinarfi

charlie Experienced

charlie

Posted
  • Author
Posted

im gonna have it tested thanx for the reply kinarfi, I thought when we spoke last you said you had replaced your starter did youb get a factory one or is there another that will fit??? It happened yestarday couple times just didnt wanna start could here the relay clicking so Im assuming enless its the neutral switch the wiring is good.

bruhaw Collaborator

bruhaw

Posted
Posted

Kinarfi and Lenny helped me out with wiring up a relay this morning. Going to do it and see what happens. I had mine tested at Autozone and they have to put in what the model of the car that starter works with or on. In my case they used a Toyota Camry which was similar in electrical specs. It passed on all 3 tests they do. I guess my question is if it tests fine on their tester could it still be intermittant when installed. Brushes bad or something like that where it could work at times and sometimes not? I am going to do the relay and hope that solves everything. Yes, you can have them rebuilt as I don't think you can find any exact replacement at least very easily. If I still have the problem I am going to one of my starter/alternator accounts that rebuilds and just have them replace everything for me and would hope that solves any problems once and for all. Going with the relay first as even if I get it rebuilt it could still give me the same intermittant problems as before so I don't know if that is the answer either.

charlie Experienced

charlie

Posted
  • Author
Posted

bruhaw

Kinarfi sent me a wire diagram withhow to install the new relay to the solinoid worked great just started acting up gonna check factory relay and check for signal when key is on was fine just started again not sure whats up but however new relay clicks everytime I try to start so eathier im loosing power or loose connection or I gues starter

charlie Experienced

charlie

Posted
  • Author
Posted

starter issue all set loose connection at relay and almost brocken connection at starter solenoid thanx for the input anyone. hey is there a cross reference number for rear wheel bearings mine is a little loose r/r talked to silverbullets they have them but didnt know if I could get one local, one of these days Ill try to put some pics of my trooper on here lol

Guest Lenny

Guest Lenny

Posted
Posted

No one else has found a cross reference for the bearing dispite trying. It's an odd balll size Silverbullet is the only one that has managed to sourse one from someone other then Joyner. The stock Joyner bearing seems to not hold up very well. Replace with tapered roller bearings and not ball bearings.

Lenny

ricksrb Mentor

ricksrb

Posted
Posted

No one else has found a cross reference for the bearing dispite trying. It's an odd balll size Silverbullet is the only one that has managed to sourse one from someone other then Joyner. The stock Joyner bearing seems to not hold up very well. Replace with tapered roller bearings and not ball bearings.

Lenny

I thought rocmoc had found something very close.Have to do a search to find it if he doesnt chime in here soon.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.
    • lincolnsq175
      Are there any performance parts for ut400?
      By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • Garjess
      RTV 1140 Starter Relay
      By Garjess
      My rtv 1140 won't turn over.  I've jumped the neutral switch, and the brake switch, and checked the ignition switch. I'm not getting any power to the trigger wire on the starter solenoid.  It starts fine with the key on and putting power to the trigger wire on the solonoid.
      Does a 2010 RTV 1140 cpx have a starter relay? 
      Does anyone have a wiring diagram?
    • Jamie 67
      Why is there 2 different length keys for my tboss 1000
      By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • AaronD1982
      Massimo 400S Buck UTV Starter solenoid replacement
      By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...