Quantcast
Jump to content


UTV PAID RESEARCH

Lighthouse Research
 Share

Recommended Posts

Lighthouse Research Newbie

Lighthouse Research

Posted
Posted

We are conducting a research study among Side-by-Side Utility Vehicle owners in Salt Lake City who own the following vehicles:

1401 Can Am Commander 800

1401 Can Am Commander 1000

1602 John Deere XUV 625i

1601 John Deere XUV 825i

The research study will take place on Saturday February 11, 2012, where you will have the opportunity to share your opinions regarding current and future vehicle designs. We aren’t selling anything and are only interested your opinions. Your input helps manufacturers develop future products. The study will last about one hour and you will receive $150 cash for your participation. If you want to participate, please contact Nan or Vonnie at 801-446-4000.

If you don't own any of these UTVs, but know someone send me their name, and if they participate, you will receive a $25.00 referral fee.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Jay Joseph
      2019 CF Moto uforce 1000 02 sensor
      By Jay Joseph
      I have a 2019 CF Moto uforce 1000 my yellow engine light is on and I bought a diagnostics tool online I plugged it into my machine and it came back with error code O2 sensors so I replaced them both plug the diagnostic tool back in the yellow light was off. I let it sit for two days and now the yellow lights back on and when I plug the diagnostic tool back in it says O2 sensor low-voltage bank two sensor one. Does anyone  know what this means? Replace both sensors with new ones. I thought I’d save some money and not bring it to a dealer, but looks like I might have to. I took my machine up to camp and it ran like crap almost like it was getting too much gas. Half throttle it was all right but climbing hills, and going over certain terrain it would just die out
    • rich isaacs
      2019 prowler 1000 limited rpm
      By rich isaacs
      got a 2019 articat prowler, it will only rev to 3800 rpms then says limited rpms . have switched gauge cluster with another machine. it worked fine in other machine but the other machines cluster and ecm did the same limited rpms.
    • GBarney
      d1105T install in rtv 1000?
      By GBarney
      Recently bought a 2010 RTV 1100 with bad engine. a d1105T out of a toro 5400 just came available locally. Looking for info on if anybody has installed the turbo version of this engine, what challenges/ problems were encountered, how it turned out.
       
      Looks like nobody has any insight. I will complete installation and report back as to how it went, how it works, and what's involved.
    • Karlibob
      2020 Tracker 800 sx front end noise
      By Karlibob
      I have a 2020 800 sx with about 16 hours on it.  From day one I have heard a clunking noise from the front end going over bumps.  Has anyone else experienced this?  Also this past weekend while out riding I heard a noise that sounded like the dump bed bounced three or four different times, again has anyone experienced anything like that.  Thanks, gary
    • Jon Spruill
      2018 Hisun Sector 1000 Crew stalling but starts right back up. Please help!
      By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...