Quantcast
Jump to content


Recommended Posts

Posted

We now have some parts in New York port.

6 joyner differentials ( 1 renegade front ,1 renegade rear , 1 trooper front,3 trooper rear)

and 2 1100 chery ECU ,2 throttle position sensor, 1 valve cover.

we want to sell them compeletely in cost price.

IF you are interested ,I will send you the BIll of loading details

Thank you .

Posted

There maybe some additional info posted about the parts from another member of this board. The person has cleared it with me so only Admin can delete his post. Just be careful sending anyone money you don't know!

rocmoc n AZ/Mexico

Posted

Buyer Beware I was the one that order these parts it went so bad that paypal gave me my money back then he sent me this email

hi,David, IF you still want to get the goods . please wire transfere the money to our account.

Please consider our request ,we still hope we can establish a long term relationship.

Posted

Difference of opinion is fine but keep it civil. I WILL edit out ANY & ALL bad language. If a person continues, I will delete their posts without notice or feedback.

rocmoc n AZ/Mexico

Posted

Bob, Paypal gave me my money back I paid you but you could not deliver the parts I paid you what you ask I didn't charge back. I didn't get the parts paypal gave me my money back.Look everybody what he thinks about America and you want to buy parts from him.There is a storage fee over 1200.00 on these parts plus I was going to have to get them clear from customs.After 60 days paypal gave me my money back. The bill of landing didn't match up with the marking on the boxes and when I email bob all he could say is release the money and he said he's responsibity end it when he ship the parts

Posted

Dear Mr. Plumber,

It seems that oversea re-issued a original bill of lading to the shipper. Please contact the shipper to send the original bill to us or have him surrender it at origin. Otherwise I would need it from you for collection. Please read below. thank you.

"YOUR SATISFACTION IS OUR PROMISE"

Robert Mar

Eurasia Freight Service - NYC

230-79 Int'l Airport Center Blvd Suite 250

Jamaica, NY 11413

Tel: 718-244-8887

Fax: 718-244-1682

E-Mail: [email protected]

Web Site: www.eurasiafreight.com

Posted

hi,David,

our responsibility is over when we deliver the goods to the shipping company.

You have received the bill of loading . you have inspected the goods.

Now why you still hold the money ? If you still feel ok, get the issue resolved and release the money .

otherwise ,we will hold on the goods to wait for resolution.

Best Regards!

Bob Qiao

Posted

Dear Mr. Plumber,

Please help AZ verify the markings on your shipment so it will transport to Louisville. On hold at AZ NY at the moment until confirmed. Tayanne and Sprite in copy. Please acknowledge, thank you.

Hbl#eurfl12512813lui. On hold for marks. Received 4 bags. Marks (70910753 deppon). Please advise, frt on hold. IT to Louisville

Rgds.

Tayanne

"YOUR SATISFACTION IS OUR PROMISE"

Robert Mar

Eurasia Freight Service - NYC

230-79 Int'l Airport Center Blvd Suite 250

Jamaica, NY 11413

Tel: 718-244-8887

Fax: 718-244-1682

E-Mail: [email protected]

Web Site: www.eurasiafreight.com

Guest
This topic is now closed to further replies.
  • Similar Topics

    • By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • By nrggaragebuilds
      2004 250DL DIRT DEVIL. Hey y’all, I already know this is a long shot. But I am looking for a the “prick gear” assembly that makes reverse work for my external reverse gearbox. OEM PN D250.08.103 and its assembly. I bought the kart as a basket case, but I saw that the reverse box was present so I was optimistic.  Upon starting working on the buggy I realized there was a block off plate in plate of there the normal gear would be. If my understanding is correct that means the transmission no longer has reverse gear. I figured it’s just a standard bevel gear and I could probably find a gear to make work, but I don’t want to spend the time making all the other housing parts to shim the gear perfectly. Has anyone spare parts, or figured out an aftermarket solution from McMaster? I already know it’ll be a challenge to get this box to be happy again, but figured I would ask  
    • By mrpro
      I got the fronts adjusted.  I'm trying to raise the ride height in the rear, but my spanner wrench keeps slipping.  Is there an easier better way?  It's like there's too much pressure working against me to be able to twist the height adjusters.  How can I relieve that tension to make them easier to turn?  
    • By mike28honda
      I have an Axis 500 and never had any problems until now,it cuts out 
      at around half throttle. I changed the TPS with no difference, acts like the seatbelts aren't set but can get up to around 15 mph as long as I don't give it too much gas, thanks for any advice 
×
×
  • Create New...