Quantcast
Jump to content


NEED HELP ASAP!!!!!


goindeep

Recommended Posts

I have a trooper in the shop right now that is a job of fixing another shops screw ups... a local shop here in houston completely chopped the body control harnes up.. i have built a new harness but still lacking the 4x4 switch.. can anyone tell me what the four wires are supposed to go to? i.e. color = ground, color = 4x4, color = 4x2, constant hot??? i dont want to fry the actuator by guessing...

Thanks

Josh

No Limitz

Link to comment
Share on other sites

I have a trooper in the shop right now that is a job of fixing another shops screw ups... a local shop here in houston completely chopped the body control harnes up.. i have built a new harness but still lacking the 4x4 switch.. can anyone tell me what the four wires are supposed to go to? i.e. color = ground, color = 4x4, color = 4x2, constant hot??? i dont want to fry the actuator by guessing...

Thanks

Josh

No Limitz

If by chance, hope it doesn't happen, you fry the actuator; I have a brand NEW unit never installed. IF you are talking about the unit at the diff!

rocmoc n AZ/Mexico

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Pop Bob
      Just bought my first SxS 4 days ago. Looking forward to hitting some trails and back roads. Having a few issues with the machine(Vector 500), but nothing serious. Just setup and tweaking. I would like to by some accessories, but I don’t seem to be able to find much which is machine specific. Or at least my machine. Does hisun offer accessories? Any advice would be appreciated. 
    • By htrotte
      #1   While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
      Author #2   Finally got the pictures took.  See the photo and tell me if you know what the switch on the right is.
      It looks to be factory and I know the girl who bought it new and she didn't install it.
      I can't find anything on it in any manual i have looked at.  Any help would be appreciated.

    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By Mark T
      MY 400 is gutless. I would like to know if I can upgrade to a larger engine ?
    • By htrotte
      While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
       
×
×
  • Create New...