Quantcast
Jump to content

Hello. Just another newbie!


Big'n

Recommended Posts

Hi, they call me Big'n and I just joined this site. I have an '08 Trooper and I ride here in Eastern K and Southwestern WV. I was just wondering why I never see a Joyner at these off road places going up those nasty trails that I see the razors on? I know we get better traction cause we're heavier and have a better 4 wheel drive system. I have been told the Joyner wont hold up, that may be true because I haven't had mine long enough to know. I bought it used and have already had to replace 3 axle shafts, all 4 wheel bearings, all 4 ball joints, all steering components including the steering box. I am now having a problem with my front drive line and my winch, lights and 4x4 switch have quit. I sure hope I get everything lined out and have no more problems! Their is some wonderful country around here that I hope to explore.

Link to comment
Share on other sites

wow sorry to hear that sounds like who ever owned that before didnt take care of it well. I have an 09 trooper yes I have had problems but I keep up with it and always check it ova. I have driven mine threw snow some deep mud a foot or so and been in 2' of water but I have done a pretty good job water proofing mine. I have also climbed some nasty hills and gone down some nasty hills and off camber type stuff everyone is different and all areas are too just my thoughts. GOOD LUCK

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • By CYJSP2009
      Dear Joyner owners
      Any one who is looking for below Joyner parts please send email to casey from Leaf Asia  ( please send to [email protected] and cc to casey2leafasia.biz & [email protected])
      Currently, we have supply below parts: 
      1.  cv axles, cv rebuild kits, cv boots
      2.  Differentials and differential ring and pinion set
      3. Cables, 
      4. Brake parts
      5. Engine parts
      6. Other parts. 
      We will provide better price, close follow up ... 
      We can arrange productioni for parts that we can collect demands from customers  
      Have a good weekend
      Casey /  Leaf Asia 
      2023-11-17
       
    • By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
    • By great8redsfan
      Okay folks. I have a low power issue. Been like this for a few years. Place I work at bought 3 and all have lost most of the pulling power.  They gave them away after local shop worked on one for 3 months and it had great power for about 1 month and then crap. They replaced throttle body, fuel injector, spark plug and IAC motor. Seat belt switches have wires cut and left open so no seat belt warning light anymore. It revs to 6k rpm in neutral but when put in gear and take off in low it just doesn’t seem to want to go anymore. Running 93 octane fuel with Stabil.  Any ideas greatly appreciated. I dont have a scan tool but no codes on dash. If held to floor it pops a little and runs almost 5K rpm but if I let off pedal about an inch it smoothed out and revs up to 6k rpm. 
×
×
  • Create New...