Quantcast
Jump to content

2005 Mule 3010 Starter

herd73

By herd73
in Kawasaki UTV SxS Forum

 Share

Recommended Posts

kenfain Experienced

kenfain

Posted
Posted

That sounds like an lot of time to spend pulling a motor, that's relatively easy to get to. I'd call a different dealer and ask a couple questions. First I'd ask if the motor has to be pulled to replace the starter. If the answer is no, then you'll know the other place is less than honest. If yes then ask what the book time is on starter replacement.

No matter which place you take it to, let them make the diagnosis. If you take it to the second place, and tell them you think it needs a starter then that's what they'll replace. If that's not actually your problem, then you're out of luck on getting them to then fix your problem without paying extra. If they give a wrong diagnosis then they have some amount of liability to make it right.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Alien10
      New here, thanks for letting me join.
      By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • htrotte
      2011 hs500efi third temperature switch?
      By htrotte
      While troubleshooting an issue with temp warning light I discovered another temp switch mounted in the pipe going to the head  The two switches are literally 6 inches apart.  Does anyone know what this third switch is used for?  If i can figure out how I will post pictures.
       
    • sister sweety
      New member here
      By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • Buddee
      2010 500 - New Carb- Hesitation
      By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • ATRican
      New here from PR
      By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...