Quantcast
Jump to content


Recommended Posts

Posted

So my trooper has been sitting basically since December I always run high test gas and its run here and there at idle from time to time last time it ran seemed ok today while idling it seemed little choppy and giving it gas seemed to be breaking up a little kinda like a misfire I have about 1400 miles on it I plan on dumping the gas and will inspect the plugs I have ngk iridium plugs in it been there since 1200 miles know also have a fuel programmer on stage 1 factory never have changed it thoughts anyone????

Posted

very rare that we need to change plugs in them...not to say never...I would put fresh fuel,then check your fuel pressure ,if that doesnt help,disconnect the ground (or power) to your fuel controller to put back to stock...thats where I would start...Hardy

Posted

So I put 94 octane in it and Lucus injector cleaner and pulled the plugs they were black!!!!! I have never changed my fuel programmer setting always been the factory setting started it up was little ruff for a few seconds but now seems much better

Posted

the fuel controllers dont always work well right out of the box..they are designed to add fuel ..thats why I like to set them up with an o2 sensor...if you disconnect power to the controller then start it will run the joyner factory fuel map untill you power fuel controller back up

Posted

Ok I will give that a try see the plugs were real shitty looking and this is the first time I have had an issue but this is and was the longest the trooper sat was a long winter and needed repairs

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By Rmillerdesigns
      Hello. I have a 2016 Massimo MSU 500. I was putting on a lightbar and i screwed up and didn't disconnect the battery so when i was taking of the positive cable to put on the power from the lightbar it sparked and now the utv has no power. I turn the key over and all i hear is a chirp. No lights or anything. Everything that comes from the battery to the jumper box up by the battery shows voltage but anything coming out does not such as to the winch or anything like that
    • By Big Red Dog
      Bought my 2009 Yamaha Rhino, (fuel injected of course), recently from the original owner. Only had 500 miles and 70hrs. Starts reliably, however, it will not idle but about 50% of the time. Also, when driving slow in low or high, that is to say, relatively low rpms and below about 10 mph, it bucks and almost wants to die..... not smooth at all. However, at speed (say 12-15 mph or more) it runs very well, like it should. Any ideas?
    • By Stubbsmobile
      Hey yall,
      Helping a friend out. he purchased a 2020 massimo buck 400 utv. has about 100 hours on it. after starting the engine, shifter in low, it does fine. when shifted to high gear, most of the time it acts like its not in gear completely, and it pops out and grinds bad. when you can get it in high gear, it acts like something is binding and it wont hardley roll before it jumps out of gear and makes that grinding noise. almost like trying to dr4ive a standard transmission car and start off in 3rd or 4th gear.
      I have been on this site for several hours now, and totally understand the overall feeling about massimo utv. I can only imagine trying to find transmission parts when other members cant even find a fuel filter, lol.
      A new transmission is (part#47516) $1159.99 plus tax and freight.
      anyone have any other ideas or suggestions on what is causing the noise in high gear and not wanting to move?
      Thanks ,
      Chris
×
×
  • Create New...