Quantcast
Jump to content


Recommended Posts

Posted

I went down to Phoenix and picked up a new Joyner Renegade R4 a week ago Sunday. I can not say enough good about how I was treated. I hate driving in Phoenix and I am 4 1/2 hours from Phoenix. I called and spoke to Brandon the sales manager and asked if there was any way I could pick the buggy up on Sunday. He said no problem, he had one of his employees meet me there on Sunday. This way the traffic was no where near as bad as during the week days, although the heat was bad. I am used to highs in the upper 70's and lower 80's here in the Gila Mountains and it was 100 degrees there, so I was sweating like the proverbial stuck pig.

I got it home and the next day, I had a couple minor issues, I called Brandon at 3 in the afternoon, the next morning at 10, Fed Ex pulled in with the parts I needed. I am 61 years old and this was the best customer service I have ever received.

About the buggy, I have had 2 Polaris Rangers, a 2007 and a 2009. I had issues with both and one of the issues was broken drive belts. When they break, it is quite a job to get those strings unwrapped from the fly wheel. I also bought a Honda Big Red. The reason I bought it was it was not belt driven and had an automobile drive shaft. This was a decent buggy but REALLY lacked in power. I had to be very careful where I went with it, as if a hill was somewhat steep, it would not make it up. Even an average sized hill, I would be hardly moving by the time I got to the top. I think this was 2 things, not enough power and no lower range.

I am totally happy with the Joyner, the 1100 engine gives more than enough power and this buggy is built to last even in this rock invested country I am in. When comparing the Polaris's I had and the Honda, the Joyner takes home the bacon, hands down. Although, from what I have heard Polaris has made improvements but their prices are in my opinion not in line with the product.

Gary

Posted

hey Gary...always glad to hear about good customer service..hope you enjoy your new ride...would you mind letting us know what the initial problems were,and what it took to solve them...thanks Hardy

Posted

After a heavy rain storm there was a little condensation in the temperature gauge. There was a small bulge on the side wall of the spare tire. They sent me a new tire and rim and a new temperature gauge, next day Fed Ex.

Gary

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















    • By Eman85
      I just purchased a Massimo MSU500 and no manual came with it so I have some questions. looking for part #'s and availability of basics like spark plug air and fuel filter. What is the valve adjustment specifications? 
        Is there a fuel drain? It's been sitting, low mileage but I want to drain out the old fuel and put fresh. 
    • By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











×
×
  • Create New...