Earlier this week — and after much anticipation — Lexus unveiled the new 2022 LX 600 SUV. It's a luxurious American version of the new Land Cruiser and shares a V6 powertrain with the new Toyota Tundra pickup. The LX wasn't a shock; it's just about the most characteristically "Lexus" vehicle one could imagine, except perhaps the LS sedan. But Lexus also released a different vehicle you would not have expected this week.
At the end of the LX announcement video, Lexus teased a new mobility concept called the "Recreational Off-Highway Vehicle," or ROV. It's an all-terrain vehicle — or, as we will choose to interpret it, a supremely badass golf cart — that runs on a hydrogen combustion engine. Sadly, Lexus did not include an utterly superfluous spindle grille, although the shape of the front end will certainly remind you of that shape.
An ATV makes perfect sense as a showcase for hydrogen combustion. One of the technology's most significant drawbacks for current production use is that it can't produce as much power as gasoline combustion engines with the same size engine footprint. So a low-speed wood path cruiser could get away with far less power than a recreational on-highway vehicle.
Read more from source: https://www.gearpatrol.com/cars/a37974052/lexus-off-road-atv-concept/
Wiring harness is a mess has anyone ever tore it all out and only put in the basics. Power ,ignition ,starter, stator and regulatorBy Hisun .500
So my hisun 500 is tore up and all the wiring is wasted i was wondering can i pull out all the wiring and just put in the. Basics .please help
I need some help.
I bought a new Renegade in June 2021 and have only put 60 miles on it and the other day checking cows I noticed the oil light on and the oil gauge reading zero and the oil light on.
Is there a better oil sensing unit than the factory? I've ordered one from Joyner ($60) but would like to have a supply if they are going to go out after 60 miles.
Its maker has affectionately dubbed it Teslaris, for obvious reasons.
The Polaris RZR RS1 UTV has a one-liter, two-cylinder engine that from the factory has around 100 horsepower, making the 1,383-pound (627-kilogram) UTV very quick. But there’s always room for more power in one of these vehicles, and instead of fettling with its engine, one dune vehicle aficionado decided to swap in the rear drive motor out of a Tesla Model 3 / Model Y.
We don’t know how many of the battery modules the put in the vehicle, but it doesn’t appear to be much heavier than stock and it goes up sand dunes with remarkable ease. Depending on which version of Model 3 was the motor donor, the drive unit could have either 261 or 325 horsepower, as long as the battery pack can supply enough wattage and voltage.
Judging by how easily it flies up the steep sand dune, almost lifting the front wheels off the ground under harder acceleration, it’s safe to say it looks like a real hoot. The steep grade you see it tackling in the video uploaded by the electric UTV’s creator, Ron Cobbley, is located in the St. Anthony, Idaho sand dunes.
We found more videos on vehicle’s official Instagram account and aside from how interesting it is to see an electric powertrain in an application like this (and how it changes the vehicle), we also noticed that you really hear the tires on the sand more. Usually, this sound is drowned out by the engine.
The sound’s tone and pitch probably change with speed, giving the driver audible information to help him or her gauge their speed. You don’t really get this in a road-going EV driven on tarmac, which is why it’s trickier to drive an EV quickly - specifically because you have no way of knowing how fast you’re going just by ear.
By wes treleaven
Hi all, New member and new joyner trooper owner here.
Just picked it up yesterday. I worked for it. -40C here in Winnipeg, Canada loading it into a trailer. Unit was too tall. Some ratchet straps, recopricating saw and a lot of F^#ks.
Anyway she came with a broken front driveshaft. One of the ears was cracked off. I have a replacement but i am unsure how the driveshaft comes off the transfer case.
Doesn't sem to pull off or have any way to remove it. Any suggestions??