Quantcast
Jump to content


Recommended Posts

Posted

Hi All, New to the Forum but not new to Mules.
I am upgrading from Mule 610 to a FX PRO EPS LE. (2016 new old stock).
Added the Kawasaki full windshield, winch and plow. I really want to add the soft doors as shown in the attached picture, direct from Kawasaki accessory website.
Has anyone seen these doors installed on a PRO FX with the hard top?
The notes in the item description says they only work with the full windshield and the full soft enclosure.
The dealer agrees with me and believes they will work fine but isn't willing to commit. (take them back if there is a problem we can't see)


Any words of wisdom would be great.

Many thanks,

Bob

Sidecurtains.jpg

Posted

Well I downloaded the install instructions for the doors and it is clear that the doors do not need the complete soft top to work on the FX PRO EPS LE.
The windshield does make a difference because of hinge mounting and the mounting of the windshield support brackets. I am rolling the dice and ordered the door along with the other options for my new Mule.
I will keep everyone posted on the outcome including pictures.

  • Like 1
  • 2 weeks later...
Posted

Well the saga continues.
I appears the options I ordered are back ordered and not expected to be in until mid Sept. I decided to leave the machine with the dealer until all the options are in and installed. He was ok with that but it seems there is a factory rebate the runs out at the end of this month. Soooo, I have to go in and pay, "take delivery" before the end of the month or lose the rebate. I searched long and hard to find this machine so this dealer is a solid 2.5 hour drive to get to. I don't own a trailer big enough so I will have to rent one.. The end result of this situation is I will have to drive out to the dealer to pay and do paper work, and still leave the machine there. Then in Sept when everything comes in and gets installed I will rent the trailer and make the last trip to pick it up.

So for this thread there is likely going to be a long wait for the update that describes the results on the doors (side curtains).

Thanks to all for the input. I will continue to monitor this thread for any additional comments.

By the way, the dealer has been great through out this deal. I will be happy to pass along the name to anyone that asks. Dealer location is PA.


Bob

Posted

Quick update.... I paid, did the paper work and left the unit at the dealer until the accessories come in and get installed. (according to plan) The dealer had a nice surprise for me... He gave me about $150.00 of official Kawasaki clothing and a hat. Really nice gesture. it is really a shame he is so far away..

I found another post where the soft top/back were installed with the hard top. The guy said it worked out great and they only had to make a few small holes in the soft top to reattach the hard top. Interesting.. as I have some time to think this through we will see.....


Keep the tires on the bottom...;~)

Bob

  • 4 weeks later...
Posted

20180816_112440.thumb.jpg.d1dd4c159a909d780c7ca1661102b0ae.jpgOK.... All the parts are in and I took delivery of my new / old stock 2016 Mule Pro EPS LE 8/16/2018! Yaaaa. The unit is all put perfect. The dealer installed a brand new battery. ( nice touch) The winch, Plow Windshield and "Side curtains" all fit and function perfectly. A primary reason for this post is to inform the world the soft side curtains do not require the full soft enclosure. They function just fine with out it. Keep in mind they do not form a perfect seal and I fully expect they will leak a bit and will be drafty. I never expected the doors to close like a refrigerator. You will be able to sit out in a rain storm and stay reasonably dry. They will keep most of the blowing snow off you and for sure break the wind.
The unit rides better than my 2016 $60k Ford truck over the dirt roads.

Another piece of useful information. If you expect to rent a 6 X 12 utility trailer from UHaul for transporting you new or old Mule Pro don't! The opening in the rear where you would expect to drive your machine up the ramp and onto the trailer is too small!!!!
This info is not published on any of the UHaul specs that I could find. I was lucky and noticed it just as the tech was dropping the trailer on my hitch. I had to regroup and ended up renting a car hauler trailer for the 2.5 hour drive back from the dealer.
Also the car hauler trailer was more than twice the cost of the utility trailer.


The dealer is Sport & Turf in Pottstown PA. Worth the trip for sure. Sales person Chris. Really a very nice and knowledgeable guy.


Now I need to concentrate on logging some serious hours on the beast!

Keep the tires on the bottom,  ;~)

Bob


20180816_112451.thumb.jpg.543c3347745088733ddac53b997dcd18.jpg
 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Fmaxiron
      I just purchased a 2023 Honda Pioneer a couple of weeks ago and had the hard roof and a front Honda Pioneer windshield installed at the shop before taking ownership. As things are drying up here in NC, the grass and dust are beginning to fly right through the back of the cab while driving. I was wondering if anyone has any good recommendations on rear windshields, dust panels, or mesh screens to help stop this?
      Thanks a lot!
    • By carbdoctor
      I have an 850. It’s been overheating. The electric fan is not kicking on. I see the temperature switch going into the radiator, but there’s no wire plugging in to it or none to be found in the area. i’m thinking I might’ve hooked on a branch and it ripped out the harness on that part. Does anybody have a picture or no where that plugs into on the harness? On the top of the firewall, I did notice some plugs that have nothing plugged into it. I was wondering if it’s a harness that goes from there down to the radiator that was pulled off


    • By paul allen
      right front axle cv joint boot keeps getting torn up from the inside out....the stock one was damaged from a stick...i have replaced  the axle 4 times with aftermarket axles that fit fine..after 4-5 miles of riding even on grass.the outer boot get torn up from the inside out...all 4 brand new alxes...bearings are fine nothing bent everything fits just fine....nothing seems to be binding.....any thoughts?????
       
       
      thanks...pa
       
    • By MilSurpYinzer
      I heard there's several off road festivals out that way. One or two post apocalyptic, the rest just rev and run. Anyone know a good one that offers camping? Any advice for out of state people like hauling, legality, and where to stay?
      Ideally me and the missus would be down for camping out and setting up shop somewhere nearby. That way we can just wake up, load up, and ride.
    • By RBonds007
      I bought this SxS brand new.  A couple of years after I bought it, I became disabled.  Thus it has only 47 miles and around 16 hours of use.  I have no need to keep the SxS.  I am in Foley, Alabama.  It is very hard for me to get in out of the Challenger.  I would like to sell the set, 2019 Challenger 400, trailer and uninstalled winch (this was bought brand new as well, someone was supposed to help this newbie install and we never got around to doing this). I want  $6500 for the whole set OBO (Serious offers only).











×
×
  • Create New...