Quantcast
Jump to content

best place to buy 2008 t2 joyner rear end?


Recommended Posts

  • Alex changed the title to best place to buy 2008 t2 joyner rear end?

I bought one from china, it was $400.00 plus about 400.00 in shipping.

It was a 2014 model and has a better bearing setup on the lockup (cover) side

but the locking setup is not as good as the as the old one. the gears are weak just like the old ones are

if you load your buggy heavy you will break teeth off of the pinion and or ring gear.

If you can get a newer year it should be better quality ( I hope )

Good luck.

Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By malenurse13
      We just bought a used 2017 American Landmaster TW450. No hour meter that I can find, so not sure exactly how much it has been used. 
      The first 2 days we had it, the starter was a little sketchy, but it started after 2-3 tries. Sometimes when turning the key, we would hear a loud metal "clink" sound. Like the starter made contact, but didn't have enough power to turn. 
      THIS MORNING... Turning the key, we hear a single click sound. That's it. Even with a new battery, the starter is still doing the same thing. Both batteries (old and new) were reading 12.8 volts on volt meter. So I'm wondering what else could be going on? Any ideas on what to look for would be greatly appreciated...
      Thank you!
    • By Timpiker
      My UTV is a few years old and gets very little use.  I just noticed the drive belt slapping the plastic guard and making some noise.  The manual tells me how to replace it but not how to tighten it.  Apparently, there is no adjustment.  Does anyone know if there is an adjustment?  Is the belt supposed to have a lot of slop in it?
    • By Byron Johnson
      Does anyone have a had time starting there utv.
      I have a T-Boss 750 and I have had to put 2 starters in and put heavier wire to the starter but it still has a problem starting. it will turn over and than die before it wil turn over again. could it be that there is to much compression that might cause this problem
       
      Thank you
    • By johnpeter
      2021 can-am maverick x3 max rr 4x4 - 4 seater - Tan and Black On Ebay
      https://www.ebay.com/itm/315050791547?

    • By MitchSpence
      I have a Massimo Buck 400 2020 model. It is not starting and I am pretty sure it is the solenoid. Anyone know where I can get part? Ebay and Amazon have one but with a different connector. Anybody?
×
×
  • Create New...