Quantcast
Jump to content


Recommended Posts

Posted

I have a Kioti  Mechron utv and want to add power steering. Can anyone till me if there is an electric assist motor from a car that would work putting between the steering wheel and steering box. One that doesn't need alot of electronics 

Posted

Just a guess, but I'd suspect that you'd be better off using a utv power rack n pinion. Maybe off an older Kubota 9000. Either way you're gonna have to do some fabrication. If Kioti has a power steering model, you might get lucky. 

  • 1 month later...
Posted
On 3/22/2019 at 9:03 PM, Steve Waldner said:

This,  I'm guessing, uses hydraulics which i don't have. 

They have electric powered hydraulic pumps. Kinda like how a power steering makes hydraulic power, using a pulley off the engine. These would use an electric motor to accomplish the same thing. But you still need a hydraulic rack and pinion. I'd look for a vehicle that has the same width, as measured hub to hub. There's plenty of vehicles that have power steering. But mounting it will still require lots of modification, as well as a significant cost. Most of the cost would be in acquiring the rack, since a utv salvage yard will be difficult to impossible to find. The research of finding a suitable sized rack will be a daunting task. But you might get lucky, since being real close would probably work just fine. But the fabrication will need to be perfect, if its gonna drive & ride right. Give WCF a call, maybe he's got a simple solution.

  • 5 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By AaronD1982
      I recently purchased a 2019 or 2020 (no manual) Massimo 400S Buck Series UTV.  It ran fine for a couple days but the low battery light was flashing while it drove.  It then died in the field one day and I was able to jump the battery and get it rolling enough to get back to the barn.  It started both times I turned the key for a couple days after and when driven died 10 minutes later in the driveway.  Even after jumping it had no juice, but with the key out of the ignition it kept trying to start, a quick look on the Google machine and it suggested starter solenoid or ignition switch was the culprit.  Fair enough, let's just order a replacement solenoid, right?  No way Jose....the pin connector on the UTV is a 2-pin white plastic connector and the part received is a 4 pin.  How do I swap that and make it work?  Can I even?  Where do I find correct parts in the future?
×
×
  • Create New...