Quantcast
Jump to content

ranger XP 1000 HIghlifter Or Honda Pioneer 1000LE?


Recommended Posts

So, im new to UTV's always ridden ATV's typically the Polaris 850's and such and a few Rubicon's. Moved into the county with some land and figured I'd get back into the country mud. I've been doing some research on UTV's and I am impressed, I went to the local pony powersports and sat in a few atvs, being 6ft1 and 360lbs I wanted to make sure I could fit into one of them comfortably before doing my research on which one I wanted. My conclusion was - the Honda Pioneer 1000 limited edition , or the Polaris ranger xp 1000 (would prefer the highlander edition).  I was trying to do some research on which one is better, I know they are both leaders in the industry from the research I have done.  I'll mostly be driving through creeks taking it to some trails and moving some things here and there (firewood, fallen trees, ect.) the years im considering are 2017,2018 and if there is a big enough change in the model that a 2019 would make more sense then I would do that. Looking to spend 20k ish. Any help on deciding the better of the rangers and pioneers would be appreciated, or if you have another UTV a bigger guy should look into! 

Link to comment
Share on other sites

Hey Tony. Just a quick look at the two, looks like the Ranger is a bigger machine. At over 1500 lbs. It likely won't be much for mud, or creeks. But if you're looking for a firewood hauler, it looks like it's on point.

Most of these machines aren't as versatile as the manufacturers would have you believe. Unlike a truck, typically you can't infinitely upgrade. Eventually creating a bullet proof mud buggy, that can haul a load of wood through a creek. 

Instead, it's typically a serious trade off. You have to decide what you'll do with it the most. If it's mostly work, then get the big one. A set of mud tires, and a winch, will get you most places you'll want to go.

If it's mostly for trails, and mud, but needs to be able to do some hauling also. Then make sure you pick a model that has lots of wheel travel space in the fender well. Plenty of available upgrades, like lift kits, tires, maybe a power upgrade as well. It'll still be good for some light duty work. It does have a bed on it after all. But make no mistake, those tiny axles, won't take a lot of torque. Any more than that big machine will float on top of the mud. 

Link to comment
Share on other sites

  • 7 months later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Alien10
      I have a Coleman Outfitter 550 purchased in January 2022 that runs and operates pretty well.  65 hours on it so far.   It is a work vehicle for my 10 hilly acres with two 1 acre woods and 5 acres of "lawn".  The rest is under a lake. 
      My parking brake does not seem to have any grip.  It worked when new but after a month or so, it is just almost useless.     I press the parking brake pedal hard until it stops. Still, it won't hold even on slight inclines.   I don't see the caliper move as I press the brake pedal down.  There seems to be plenty of pad left on it and the rotor is shiny as if it is rubbing a little when applied, but not enough to stop it from rolling. 
      Any thoughts on possible causes? 
       
    • By sister sweety
      Thank you for adding me, I am the owner of a 2021 axis 700 UTV and also a 2023 Can-Am defender UTV

    • By Buddee
      Put a new carb on the 500 to replace the leaking OE one.  Machine idles fine and mid and top end runs great.  It tends to have a hesitation right from the start - bottom end.   Thinking it may be the air/fuel screw??  I didn't do anything with the carb out of the box and is it direct replacement for my machine.  Of interest is the manual choke doesn't seem to work very good now.... wonder is it getting too much air?
       
      Any help appreciated!
       
       
    • By ATRican
      Just got a 2024 Odes Junglecross 800 cc four door 5 seater today. Feel free to share advice on longevity tips and common failures of this model.
      AR
    • By donny
      Hey everyone new to forum I have a 2014 Odes raider and a 2009 Suzuki Ozark 250 both down atm 😔
×
×
  • Create New...