Quantcast
Jump to content


Recommended Posts

Posted

So i have a 2018 Hisun Sector 750 Crew and while driving the noise level is outrageous.  I want to find a way to decrease the decibel level, so does anyone have any ideas!!! i was thinking about installing foam on the roof enclosure and possibly putting something around the engine bay area.  I have not found any companies that makes a suppressor for the muffler...Any help would be appreciated.  thank you

  • Like 1
Posted

I have a diesel mule that has the intake in the rops bar. It's loud also. A back window tamed the noise to a tolerable level. Since I'm not familiar with your machine, it might not be helpful. But insulating, and deflecting that noisemaker away from the cab would be the way to approach this.

Just a shot in the dark here. But I see those black truck bedliners, on the side of the road that've blown out of a truck. That stuff would be an excellent material to fabricate what you've described.

  • 2 weeks later...
Posted

I used this for good effect - self sticking with aluminum foil on exposed side.  

Noico 80 mil 10 sqft car Sound deadening mat, Butyl Automotive Sound Deadener, Audio Noise Insulation and dampening

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • By Tim n Deb
      Riding out today it acted like it ran out of gas,  stalled and died and would not start.   Towed back to house,  New  plug added this past month,  plenty of oil, getting plenty of gas, battery cranks good.   Trys to kick in and starts but doesnt.   Two days prior while sitting at a idle it died.  Added gas and it started did my ranch chores with it.  But just now it stalled out cranks but will not start.   Tried to find if fault codes came up on the clock like manual says but not sure I am doing that right.  Any and all help apprecated.  Thank you
    • By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       
    • By Gary Odom
      Noticed the radiator reservoir has a pin hole leak at the seam. unit has less than 600 miles. Anyone else have this issue.
×
×
  • Create New...