Quantcast
Jump to content


Recommended Posts

Posted

I just went once to do some mudding and loved it.

Looking around and the only utv for 4 i could find in my price range was a joyner.

None of the people that were there had joyners. And when i asked why all they could say is that bc its chinese and not good.

Well none of them have ever owned one so how could they tell its junk?

So can anyone tell me if its worth buying a joyner or save more and buy a different utv?

Thank you

Posted

I've said this on other posts.  There is no perfect UTV.  Even brand name UTVs have issues with broken/overheated/burnedf belts, drive shafts, CV joints, etc. especially when driven beyond their capability.  I bought a used Joyner because 1) I pave my own roads, 2) I can't see spending $20k-$30k for a "pretty" UTV that I might ride a few times a year.  The early Joyners had quality control issues, but they've seem to have improved.  UTVs with CVTs are easier to drive.  The Joyners with the clutch and 5-speed transmissions require you to take an active role in managing power to the drive axles.  The John Deere 825i uses the same Chery engine (800cc) as the early Renegades.  One model of the Kawasaki also uses a Chery engine.  If the UTV has a gasoline engine (3-cyl 800cc or 4-cyl 1100cc), it just might be a Chery engine.  Those owners probably don't know it that they are driving Chinese "junk"..  The larger displacement Chery engines are relatively common in cars sold in Asia, Africa and South America.  In 2014, the Renegader has the 1100cc engine - same as their Trooper.  The Joyner and Troopers are wide machines (60in); you may be limited to where you can ride on narrow trails.  I did a search for UTV recalls.  Most brand name UTVs & ATVs have had safety recalls.  I couldn't find any recalls for Joyner Troopers or Renegades.  Maybe they just don't issue recalls whether needed or not.  Support for these UTVs however, may be difficult to find.  Dealerships aren't as wide spread as name brand UTVs.  I haven't experienced any issues with my UTV - yet.  I use mine as a means of transportation in the backwoods, not as a race car to jump over cliffs.

Posted

I was in the same position many years ago and purchased a slightly used T4 from a friend. Had about 1000 miles on it then, over 6000 on it now.
It’s been a great machine, replaced fuel filter once, wheel bearings and a few bushings over the years, but it’s been a very dependable machine and still is.
I have tags on it so it’s street legal. I always tease the RZR guys that I can take them back to their truck when they break and axle or belt...and I usually do

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Popular Now

  • Similar Topics

    • By AaronD1982
      Next problem with charging system to tackle, any help would be appreciated.
      New starter solenoid....check
      New Voltage Regulator...check.
      Dynamic test to Stator.....bang...pulling like 2 Volts AC
      Problem: Without pulling the part out and stranding the vehicle at the shop forever.... I am trying to find the correct stator or at least one that might not be exact for the Massimo Buck 400S, but fit and connect and do the job if that makes sense.... if anyone has any ideas, please shoot them my way.
    • By rdc
      I posted this before , but I had the year wrong. The part I need is for a 2014, I don't know what all years will work, but I need the 2 bearing style with the spacer in the middle. It looks like this pic. If anyone has one I'll buy it rite away. my email is [email protected]. Thanks, RC

    • By rdc
      Hope I posted this in the right place. Looking for the left side shaft carrier where the rear bearings go for an 1100cc sand viper, I understand an 800 cc carrier will also work. I need the old style two bearing with the spacer in the middle, the new style with just the one wide bearing wont work. If anybody has one I'll buy it right away. my email is [email protected]
    • By Jamie 67
      Why is there 2 different length keys for my tboss 1000?
    • By 180gtr
      Parting out a rolled Sand viper 1100. I will list some of the parts I have, otherwise ask me if there is something specific you are looking for. I am selling everything I have for $800. I am located near Glenwood Springs CO.
      SOLD ITEMS, I do not have these items.
      Wheels
      Tires
      Engine
      Transmission
      Axles
      Shocks
      Control Arms
      Things I have....These all came off of the running engine. I have video of it running if anyone needs to verify that.
      Throttle Body $90
      Starter $150
      Alternator $150
      Fuel rail, injectors, fpr $100
      fuel pump $70
      Map Sensor $50
      Full set of Guages $150
      Exhaust w cat, O2 SOLD
      Ignition Coil - SOLD
      Wiring harness and ecu SOLD
      Radiator, shroud, elec fan, overflow tank $200
      Fuel tank w sender $150 Has dent at base of fuel neck, no leaks
      I have a box full of misc bolts, nuts, etc.
      I will sell the Chassis or Frame alone for $200. The chassis is in pretty good shape, needs some cage repair and 2 areas straightened where control arms mount. If anyone had an automotive frame machine it would take a few hours.
      That would include....
      Brake calipers, lines, pedal, master cyl, E brake assy,
      Steering shaft, wheel
      Ignition switch, key
      Light bar frame, 2 lights
      misc hardware, spindles
      2 hubs, rotors
      Engine mounts
      Throttle pedal, cables
      Shifter, cables
      Clutch master, pedal
      I am sure I am forgetting something.
      I am parting this out of ebay right now, I just picked up another project and could use the room. No I will not take less than $700 for all of it or $200 for the frame. I do not need to sell it, I will make far more parting it out but would like the extra space in the garage.
      If interested I also have an 07 1000rr engine setup I would sell with the buggy for $650.
      Thanks!
















×
×
  • Create New...