Quantcast
Jump to content


hisun hs800 belt replacement number!!

zuggy7

By zuggy7
in Hisun UTV SxS Forum

 Share

Recommended Posts

zuggy7 Newbie

zuggy7

Posted
Posted

i want to change the belt on my hisun hs800  .  i know the number for it is 25300-f68-0000...………..but i would like to get a dayco or gates belt for it  but i cant seem to cross reference those number for it...……………...has anybody else been able to cross refgerence ther belt?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Joe Rizo
      2014 Hisun 700 UTV starting problem
      By Joe Rizo
      Hello All,
      We have exhausted all possible troubleshooting steps, now we are in need of some help. 
      Vehicle cranks but will not turn over. Things we have either replaced or tested and are now known good:
      1. Fuel pump (new)
      2. Fuel sensor (new)
      3. Fuel injector (new)
      4. Battery (new)
      5. Spark plug (new), spark tested
      6. fuses (12v to all)
      7. we have 12v at the injector module and 11 ohms resistance
      8. we have fuel in the fuel line to the injector
      9. we have fuel at the spark plug
      10. we have injector pulse, verified with noid tester
      11. brake safety switch tested (couldn't find a separate switch assuming it is using the brake light switch)
      12. seat belt buckled and seat in place (again, not sure if this model has these features)
      13. replaced air filter
      14. replaced several air hoses
      15. flushed radiator and replaced with diluted antifreeze
      16. Drained and cleaned the fuel tank prior to replacing the fuel pump.
      Any ideas, we are open to....Help!!
       
    • Rschrem
      2010 700 Hisun starter issue
      By Rschrem
      Hi, my 2010 Hisun will crannk but comes to a stop and only clicks.  It has new battery and solinoid. Battery connections all seem good. Any ideas what the problem is? 
    • Joe Breaux
      Oil change
      By Joe Breaux
      Decided to do an oil change on the Massimo ...drained oil, screen was very clean even tho oil wasn't.  Then went to remove old filter.. holy crap ..I tried every tool I have, could not budge it..Went to store and got one of the end cap type..fit nice and tight, put a 1/2 in drive ratchet on it..nope..not moving.  Put a 18 on breaker bar o. It. The inside of the removal tool broke off!!  Had to weld it back together. Put a pipe on the bar for more leverage.  Finally broke it loose..
      I have never seen a filter in my 55 yrs of working on engines so tight..And i was the one who put it on 2 yrs ago.  JUST HAND TIGHT!
       
    • monkthumper
      2020 Hisun Sector 750 no pwr to fuel pump
      By monkthumper
      Fuel pump is good (i hotwired it) swapped relay with known good one no help. I'm leanin towards ECU but cannot find wiring diagram online. Dont know how fuel pump relay gets its signal, all fuses good, any help? 
    • BigWave
      2019 hisun won't run
      By BigWave
      I turned off the key and then tried to start it a minute later and it would not start. I changed out the fuel filter and the injector. still nothing. if i have the injector pulled out and close to the hole the injector will spray fuel into the hole and it will run but the minute you put the injector in it will die. any idea's please
       
       
      Bigwave
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...