Quantcast
Jump to content


Joyner 1100 Sand Viper won’t shift into 3rd or 4th

SMK

By SMK
in Joyner UTV SxS Forum

 Share

Recommended Posts

SMK Rookie

SMK

Posted
Posted

I’m not a mechanic so I don’t really know where to look for the problem and I can’t find a local shop or person to help diagnose the problem. I’m located in Southern California. So my Viper won’t shift into 3rd or 4th but 1st 2nd and reverse work fine. Can anyone point me in the right direction? Thanks

 

 

Sent from my iPhone using Tapatalk

kenfain Experienced

kenfain

Posted
Posted

Sounds like a cable malfunction. Or possibly there's an obstruction. Maybe a small stick is wedged in there. It happens a lot with any off road vehicle. Usually its just wedged harmlessly though. But sometimes it'll bind up something important.

So you need to get underneath while someone tries to shift. Do NOT force it. Just gently back, and forth while you watch the linkage try to operate. See what moves, and follow the cables, or linkage. Check from the shifter, all the way to the transmission. It sounds like there's a couple of cables involved, since hardly anyone uses mechanical linkage anymore. Make sure you're following the proper cable. Its usually not hard to find the problem. Cables typically fail on the inside though. So keep that in mind. Cables cannot be repaired. They're cheap enough, so they just get replaced.

If its certain that there's no obstruction. And the cables are in good working order. The next step would likely be the transmission itself.

  • Like 1
SMK Rookie

SMK

Posted
  • Author
Posted

Thank you for the info. Idk if there’s anything stuck because when I’m in the car and it’s not on I can shift into all gears just fine.


Sent from my iPhone using Tapatalk

SMK Rookie

SMK

Posted
  • Author
Posted
Sounds like a cable malfunction. Or possibly there's an obstruction. Maybe a small stick is wedged in there. It happens a lot with any off road vehicle. Usually its just wedged harmlessly though. But sometimes it'll bind up something important.
So you need to get underneath while someone tries to shift. Do NOT force it. Just gently back, and forth while you watch the linkage try to operate. See what moves, and follow the cables, or linkage. Check from the shifter, all the way to the transmission. It sounds like there's a couple of cables involved, since hardly anyone uses mechanical linkage anymore. Make sure you're following the proper cable. Its usually not hard to find the problem. Cables typically fail on the inside though. So keep that in mind. Cables cannot be repaired. They're cheap enough, so they just get replaced.
If its certain that there's no obstruction. And the cables are in good working order. The next step would likely be the transmission itself.

Thanks for the info. Idk if something is stuck because when the car is not on I can put it in all gears just fine. I just ordered a new clutch should be here in a few days but I need to buy a throw bearing because the clutch doesn’t come with one. Do you know where I could find one by chance??


Sent from my iPhone using Tapatalk
kenfain Experienced

kenfain

Posted
Posted

If it goes easily into gear with the motor off. Then its likely something more than a simple fix. Sounds like something internal.

A bad clutch is certainly possible. But if it were the clutch, wouldn't it be difficult to get into any gear? If it were a car, I'd say that it sounded like a faulty synchronizer. Since you've said that it will go into gear while its not running. That would require opening the transmission. Also any internal transmission parts would likely be difficult to find. But certainly not impossible. 

You'll have to take out the transmission to replace the clutch. So I'd bet the problem will be easier to find then. There's not much to a manual transmission, it's certainly not as complicated as an automatic. I'd try to find a shop service manual, that pictures the assembly. I'd be willing to bet that if the transmission is removed, it would be much easier to find someone to take a look at it.

SMK Rookie

SMK

Posted
  • Author
Posted
If it goes easily into gear with the motor off. Then its likely something more than a simple fix. Sounds like something internal.
A bad clutch is certainly possible. But if it were the clutch, wouldn't it be difficult to get into any gear? If it were a car, I'd say that it sounded like a faulty synchronizer. Since you've said that it will go into gear while its not running. That would require opening the transmission. Also any internal transmission parts would likely be difficult to find. But certainly not impossible. 
You'll have to take out the transmission to replace the clutch. So I'd bet the problem will be easier to find then. There's not much to a manual transmission, it's certainly not as complicated as an automatic. I'd try to find a shop service manual, that pictures the assembly. I'd be willing to bet that if the transmission is removed, it would be much easier to find someone to take a look at it.

Ok so after more messing around I was wrong it does not go into 3rd or 4th while the car is off. I thought it was but it was just slipping into 1st and 2nd again. I followed the shorter cables back to the end where it connects the the engine and filmed the mechanism while I tried to shift into all the gears. It looks like something is stopping it from working properly. I can’t upload the video on here for some reason but here’s some pictures e7beaff1f19bdac54b5541ed8b6047b5.jpg
1d522a40c6e5a45d254aa7ee14d446bd.jpg


Sent from my iPhone using Tapatalk
kenfain Experienced

kenfain

Posted
Posted

Just to make certain that its in the transmission, and not the cable. I'd unhook the cable, and make sure its operating freely. Then try to manually operate the mechanism. Yeah, its probably internal. But sometimes you do get lucky.

SMK Rookie

SMK

Posted
  • Author
Posted
Just to make certain that its in the transmission, and not the cable. I'd unhook the cable, and make sure its operating freely. Then try to manually operate the mechanism. Yeah, its probably internal. But sometimes you do get lucky.

Okay I’ll try that. I’ll get back to you ASAP


Sent from my iPhone using Tapatalk

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Similar Topics

    • rdc
      Joyner 1100 oil pressure problem.
      By rdc
      I have a 2007 Joyner 1100 sand viper and  before it even get's to where the thermostat opens up the oil pressure get's so low I have to shut it down. What could fix this ? I thought about adding an oil cooler with fan, thicker oil, or removing the thermostat. Any advice?
    • jertex
      Shift cable problem, 2017 Stampede 900, need advice
      By jertex
      I bought a 2017 Stampede 900 last fall that was new, old stock with less than 5 hours on it thinking that I would be getting a relatively trouble free UTV as compared to buying a used Polaris or CanAm, or Honda, etc. It's been a little quirky, but reliable. What I thought was just a minor issue with this model, the difficulty in shifting between R, N, L, H, etc., was just a characteristic of this model is now a big problem. I had to climb two very steep trails to get to the upper meadow of our hunting property, which seemed to stress the UTV more than usual since I was carrying some lumber to work on a platform for a hunting blind, and when I went to shift into park, I felt something give and it would not shift out of low, but it did move up into high gear.  I couldn't get it to shift at all at that point and the shifter felt mushy for lack of a better word. I was able to get it down to the lodge and when I investigated, I discovered that the straight, metal tube portion of the shift cable had bent to almost 90 degrees (see pics). I'm positive that it had already had some deformation that had happened previously and it had the right amount of resistance to bend to the point where it was unusable. 
      I have two questions:
      1. I suspect that there must be some other issues that makes this UTV difficult to shift, and I'm wondering if this is a common problem and if someone could enlighten me on what could cause this to be difficult to shift?
      2. Have any of you had this happen and if so, how difficult is it to replace the shifter cable?
      Any other advice is welcome, this is the first UTV that I've ever owned, so I don't know much about working on these or maintaining them. I'm relatively capable when it comes to working on my own vehicles in general, and I'm not afraid to take things apart and get my hands dirty.
      Thanks in advance for any insight, I'll be traveling most the day so I won't get a chance to look at replies until this evening.


       
    • Eman85
      Best place to find info on Hisun or Massimo UTV's
      By Eman85
      I have been searching and can't find much info on these units. Pretty surprising as every other thing I own I find a lot of info on. Researching for tech info and such it's like no one owns any of these yet I see them everywhere. 
    • Jeff freeman
      Utv wont start and broken fuel injection wire
      By Jeff freeman
      I have a Coleman 550.  Was having problems to start with where it would start and then shut off after a couple tries. It would take off and be good. It then got to a point where it would not start at all. I replaced the fuel injection twice the second time I replaced it I noticed a mouse or something had chewed one of the wires that connect the electrical to the fuel injector. . So two-part question first does anybody have a part number for that wire harness?  Second, any other ideas after I fix the wire harness permanently on what could keep it from starting I have gas flow up to the fuel injector.


    • AaronD1982
      Hoping someone out there somewhere can help.....2019 Massimo Buck 400S
      By AaronD1982
      Onto the next problem, everything has been replaced in the charging system except the Flywheel Rotor, I have it torn apart all the way down to said rotor, but it is suggested that a specific puller is required, and a compatible rotor seems virtually impossible to find.  I can find many like it, but this one is mine scenario for those that get the reference.  For all I know I have the last Massimo Buck 400S on the planet and will never find another part again, but who knows.  Any ideas, help or otherwise that anyone might have would be greatly appreciated.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...