Quantcast
Jump to content

Troubleshooting Fault Codes Pt II

Joe Toup

By Joe Toup
in Massimo UTV SxS Forum

 Share

Recommended Posts

Joe Toup Contributor

Joe Toup

Posted
Posted

Team, this guy posted some great info on a FB forum I am in for Massimos.  He offers softeare and “how to” for looking at real time data from the ECU.  I get no $ from it, not endorsing it, just passing it along in case someone else is as curious as I am.  I looked it over and it seems legit.  He has the pin outs correct and the software does look promising.  The cable I built for myself is very similar to one he shows.  Might be worth a look to try and find ways to troubleshoot these machine better. 
 

(Link edited - Previous link was bad - This one should work)

https://www.norwestsuspension.com/delphi-mt-05-diagnostics-readerrecorder

 

 

Link to comment
Share on other sites
Tmod Rookie

Tmod

Posted
Posted
1 hour ago, Joe Toup said:

Team, this guy posted some great info on a FB forum I am in for Massimos.  He offers softeare and “how to” for looking at real time data from the ECU.  I get no $ from it, not endorsing it, just passing it along in case someone else is as curious as I am.  I looked it over and it seems legit.  He has the pin outs correct and the software does look promising.  The cable I built for myself is very similar to one he shows.  Might be worth a look to try and find ways to troubleshoot these machine better. 
 

https://www.norwestsuspension.com/odes-tech/viewtopic.php?f=22&t=2&p=2&sid=ec1c97b31346f51fe059d1b33f14035e&fbclid=IwAR0NXRqJqSeL3D8dwMGuahLOFW8bnJ2Ec5s-DPuSfsg5rMH7Qz1avSjZc2c#p2

Joe, I was using PCHUD for several years but the problem with that was you needed to be running a 32 bit OS which I did in a VM enviroment, This new software is based off of PCHUD except can be used on a 64 bit OS. So I made the switch to the new software from Elmu and once I ran it through it's paces I changed the PCHUD tutorial to HUD ECU Hacker software.

I am not looking to screw anyone over and have tested this software and the cables I made on several different machines.

I am not the creator of the software but I did write up that tutorial as I do contract work for a local Bennche/Massimo/Odes/Intimidator dealer.

Everything listed that I link to purchase I have verified it does work w/o issues on these machines.

  • Like 1
Link to comment
Share on other sites
Tmod Rookie

Tmod

Posted
Posted
On 10/4/2020 at 5:34 AM, Joe Toup said:

Team, this guy posted some great info on a FB forum I am in for Massimos.  He offers softeare and “how to” for looking at real time data from the ECU.  I get no $ from it, not endorsing it, just passing it along in case someone else is as curious as I am.  I looked it over and it seems legit.  He has the pin outs correct and the software does look promising.  The cable I built for myself is very similar to one he shows.  Might be worth a look to try and find ways to troubleshoot these machine better. 
 

https://www.norwestsuspension.com/odes-tech/viewtopic.php?f=22&t=2&p=2&sid=ec1c97b31346f51fe059d1b33f14035e&fbclid=IwAR0NXRqJqSeL3D8dwMGuahLOFW8bnJ2Ec5s-DPuSfsg5rMH7Qz1avSjZc2c#p2

Joe, That link you posted is no longer valid as I performed an update and it didn't seem to like it so I moved to a different page.

https://www.norwestsuspension.com/delphi-mt-05-diagnostics-readerrecorder

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • doncaron
      Looking for part numbers
      By doncaron
      Hello everyone! 
      First of all I would like to thank you for the help with my timing problem, it was the chain. Now I’m looking for the part number for the wet clutch baring.  I’ve been looking for it but my side by side is a 2022 t-boss 550 and it’s not the same as a 2021. Can anyone help me please?
      thank you in advance again. 
       
    • Greg Kilgore
      Travel time question
      By Greg Kilgore
      I would really like to know what you guys think about this. I'll try not to ramble and make it as clear as I can.
       
      I took this new job with companyX as a fiber splicer a year ago. I have a 45' bucket truck and 10or12 x 8 ft enclosed splice trailer I have to take home. Within the last 6 months all the management in the splice dept left. Now the power/construction management and higher ups are filling in. Just recently we were told travel to our 1st job is not payable even though we are in a company vehicle. 
      We are union so I asked the union business manager about this. His reply was be grateful you were paid travel as long as you were and that you don't have to drive your POV to the job.
       
      Last week I had 50hr total. The job area is 4-4.5 hrs away. My time was reduced to 44.5 hrs since we were told this travel thing on Tuesday of that week. I wasn't hired for this area. I was hired for area a lot closer to home. 
       
      Pay is good. Work is not hard. Insurance is through the union and so far pretty good.
      But I hate the thought of having to work extra just to make a 40hr paycheck. Anyone who has to drive as part of their job knows windshield time is not easy.
       
      Anyway what do you guys think. Should I look for a different job or just suck it up because of the decent pay and health insurance.
    • MJG
      Looking to Purchase 2008 Joyner Renegade
      By MJG
      Hello, 
      I found an 08 Renegade for sale and looking to purchase it.  I haven’t heard too much about these machines and any insight would be much appreciated.  Are they good machines?
    • Nate ward
      2014 Case scout xl trans question
      By Nate ward
      Having issues with the IR model 421275 transmission. In 2wd it takes playing with the throttle to get it to engage in fwd or reverse, if you flip into 4wd, it goes into gear perfectly. Once moving, you can go back into 2wd and everything works until you stop. I changed hyd fluid and have ran the linkage in and out. Any thought on the issue?
    • shaught66
      Looking to purchase a plow kit
      By shaught66
      Hi. I am looking to purchase a plow kit to fit my 2022 Axis 500. I have looked online but only found one place to get one.  Does anyone have any place I could look? Thank you for your help.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...