Quantcast
Jump to content

Massimo 2017 MSU500 won't idle when fuel is not topped off.


David Trost

Recommended Posts

Interesting problem.   My Massimo runs great - but when the fuel level drops just a bit, it just stops.    It restarts easily, but I have to keep my foot on the accelerator pedal.   When I top it off with gas, it again runs fine.   I already replaced the fuel pump, but that didn't work.

Thanks for your help!

Link to comment
Share on other sites

If a pickup tube in the gas tank were disconnected or maybe cracked, that could explain why the engine quits after the fuel level drops (to a point where the fuel pump is pumping air).  The fuel pump draws fuel from the bottom of the tank.  But that doesn't explain why the engine runs if you hold a little accelerator pedal.  Is the fuel tank vent tube plugged somewhere between the fuel tank and the charcoal canister?  Remove the fuel filler cap to see if a vacuum in the tank is causing a loss of fuel supply.  Is the carburetor getting adequate fuel?

  • Like 2
Link to comment
Share on other sites

I just watched a YouTube video on your fuel gauge problem.  Might or might not be of help.

https://www.youtube.com/watch?v=dy6IQOE5UEA

On your other problem with the engine not running when fuel is slightly low, make sure your fuel lines (supply and return) are not swapped on top of the fuel pump.  I don't know if it is physically possible, but it's worth checking out.

Link to comment
Share on other sites

On 11/8/2020 at 10:35 AM, David Trost said:

Interesting problem.   My Massimo runs great - but when the fuel level drops just a bit, it just stops.    It restarts easily, but I have to keep my foot on the accelerator pedal.   When I top it off with gas, it again runs fine.   I already replaced the fuel pump, but that didn't work.

Thanks for your help!

Try blowing out injector.  Mine  did same thing. Had plastic particles in it I’m guessing from inside gas tank as it’s all plastic anyway, maybe a burr from injection machine that form it??  Mine since idles fine after warming up a few seconds. Hope this info helps!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By KMart
      I have a Massimo 400 Buck that overheats and the antifreeze blows out of the motor everywhere! I don’t have to be doing anything but just driving through the field.  It only has 26 miles on it.  I don’t think the fan is turning to cool the motor.  Any ideas how to fix this?
    • By Michael Wood
      I have a 2018 Massimo Buck 400 with 278 miles. 
      Having issues with my brakes. Took the buggy hunting and when I let my foot off the gas pedal it pulls without pressing on the brake. I looked and the pads on all 4 wheels are all toast. The E-Brake hasn’t been on since I have had it. I am guessing it may be a master cylinder issue because all 4 pads are gone. They all seem to have worn evenly that’s why I think the master cylinder. Just got the machine used from a older couple and they said it sat for some time in there pole barn. Possibly the brake lines? Calipers? I took one brake apart and when I depressed the caliper it didn’t stay. Any help is muck appreciated. 
    • By Onebad54
      Has anyone solved the 750 Hisun Sector shifter problem?
    • By doncaron
      Hello 
      I have a 2022 Massimo t-boss 550. I’m looking for a fix for my timing problem. It keeps getting out of timing. Now I’m trying to find the proper parts for the linhai motor. I’m looking for tensioner chain and gear. If there’s anything else I can do to fix this issue please let me know. Unfortunately I can’t afford to get something better so I got to get it fixed. Thanks in advance. 
      Don
    • By Smittay
      (posted a similar question to the Hisun folks) Looked at a lot of UTVs lately. Couple Questions about Massimo. Some people say they are just cheap with no customer service. Other people seem to have no problems with them.
      Any opinions on Massimo durability?
      Heard parts might hard to get. Is that true?
      What models are the best?
      If you had one and didn't like it what do you recommend? 
×
×
  • Create New...